Belkin PM01522EA, F5D9631-4 user manual WPA2 Requirements

Page 48

Using the Web-Based Advanced User Interface

Table of Contents

sections

1

2

3

4

5

6

7

8

9

10

1.Wi-Fi Protected Setup (WPS): Enabled or Disabled.

2.Personal Identification Number (PIN) Method: In this method, a wireless client wishing to access your network must supply an

8-digit PIN to the Router. After clicking “Enroll”, you must start the WPS handshaking procedure from the client within two minutes.

3.Router PIN: If an external registrar is available, you may enter in the Router’s PIN to the registrar. Click “Generate New PIN” to change the PIN from the default value. Click “Restore Default PIN” to reset the PIN value.

4.Push Button Configuration (PBC) Method: PBC is an alternate method to connect to a WPS network. Push the PBC button located on the back of the Router for three seconds, and then initiate the PBC on the client device. Alternatively, push the “Start PBC” soft button to start this process.

5.Manual Configuration Method: This section lists the default security settings if not using WPS.

The Router features WPA2, which is the second generation of the WPA based 802.11i standard. It offers a higher level of wireless security by combining advanced network authentication and stronger Advanced Encryption Standard (AES) encryption methods.

WPA2 Requirements

IMPORTANT: In order to use WPA2 security, all your computers and wireless client adapters must be upgraded with patches, driver, and client utility software that supported WPA2. At the time of this User Manual’s publication, a couple security patches are available, for free download, from Microsoft®. These patches work only with the Windows XP operating system. Other operating systems are not supported at this time.

For Windows XP computers that do not have Service Pack 2 (SP2), a file from Microsoft called “Windows XP Support Patch for Wireless Protected Access (KB 826942)” is available for free download at http://support.microsoft.com/kb/826942

For Windows XP with Service Pack 2, Microsoft has released a free download to update the wireless client components to support WPA2 (KB971021). The update is available from:

http://support.microsoft.com/kb/917021

IMPORTANT: You also need to ensure that all your wireless client cards/ adapters support WPA2, and that you have downloaded and installed the latest driver. Most of the Belkin wireless cards have driver updates available for download from the Belkin support site: www.belkin.com/ networking.

G+ MIMO Wireless Modem Router

46

Image 48
Contents Wireless Modem Router Table of Contents Advantages of a Wireless Network IntroductionPlacement of your G+ Mimo Wireless Modem Router Important Factors for Placement and SetupRouter Placement IntroductionChoose the Quietest Channel for your Wireless Network Cordless PhonesSecure Connections, VPNs, and AOL Product Features Product OverviewBuilt-In Dynamic Host Configuration Protocol Dhcp Setup AssistantProduct Overview Support for VPN Pass-ThroughKnowing your Modem Router System RequirementsInternet Connection Settings Knowing your Modem RouterKnowing your Router Wireless-Computer Status Wired-Computer StatusRouter/Power Status SecurityAdsl Line Status Internet StatusConnections to Wired Computers Yellow Reset ButtonResetting the Router Ii. Restoring the Factory DefaultsConnecting and Configuring your modem Router Connecting and Configuring your modem Router Brand-New SetupHardware Connections Replacing an Existing Modem or Modem Router Set Up the Router Run the Setup Assistant Software Select CountryConfirmation Screen Progress Screen Checking Settings Verifying Hardware Connections Naming your Wireless Network Requesting Internet Account Info if neededConfiguring the Router Checking Internet Connection Congratulations Troubleshooting Optional Assistance Connecting Other ComputersSet Up Wireless Security Run the Security Assistant Software Progress Screen Picking the Security Type Creating a Network Key Transferring the Key Verifying the Connection Congratulations Alternate Setup Method Hardware Connections Follow the Quick Installation GuideAlternate Setup Method Logging into the Router Logging out of the RouterUsing the Web-Based Advanced User Interface Understanding the Web-Based Advanced User InterfaceUsing the Web-Based Advanced User Interface LAN Settings Internet SettingsFeatures Adsl InfoConnection Type Setting your ISP Connection Type to PPPoE or PPPoA IP assigned by ISP For Dynamic IP connection Setting your ISP Connection Type to Static IP IPoA For Static IP connectionUsing the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface Viewing the LAN Settings Changing LAN Settings IP Address Subnet MaskDhcp Server IP PoolConfiguring the Wireless Network Settings Viewing the Dhcp Client ListChanging the Wireless Network Name Ssid Changing the Wireless Channel Using the Wireless Mode Switch802.11b & 802.11g Mode 802.11g ModeUsing the Broadcast Ssid Feature Protected Mode Switch 802.11e/WMM Wi-FiMultimedia QoSChanging the Wireless Security Settings Using Wi-Fi Protected Setup WPA2 Requirements Setting WPA/WPA2-Personal PSK Setting WPA Security Setting WPA-PSKSetting WEP Encryption Using a Hexadecimal Key Setting MAC Address ControlUsing the Web-Based Advanced User Interface Configuring the Firewall Configuring Internal Forwarding Settings Manually Entering Settings into the Virtual ServerChoosing an Application Setting Client IP Filters Setting MAC Address Filtering Enabling the Demilitarized Zone DMZUsing Dynamic DNS Setting up the Router’s Dynamic DNS Update ClientUtilities Restarting the Router to Restore Normal Operation Restarting the RouterRestoring Factory Default Settings Saving a Current Configuration Using the Web-Based Advanced User Interface Restoring a Previous Configuration Using the Web-Based Advanced User Interface Updating the Firmware Checking for a New Version of FirmwareDownloading a New Version of Firmware Using the Web-Based Advanced User Interface Updating the Router’s Firmware Using the Web-Based Advanced User Interface Changing System Settings Setting or Changing the Administrator PasswordChanging the Login Time-Out Setting Setting the Time and Time Zone Enabling Remote ManagementEnabling/Disabling Auto Firmware Update Enabling/Disabling UPnPManually Configuring Network Settings Manually Configuring Network Settings in Mac OS up toManually Configuring Network Settings Manually Configuring Network Adapters in Mac OS XManually Configuring Network Settings Obtain DNS server address automatically 3. Click OK Manually Configuring Network Adapters in Windows 98 or Me Recommended Web Browser Settings Microsoft Internet Explorer 4.0 or HigherRecommended Web Browser Settings Netscape Navigator 4.0 or HigherTroubleshooting ProblemSolution Troubleshooting Setup Assistant cannot find my Router Setup Assistant cannot connect my Router to the Internet Troubleshooting Can’t connect to the Internet wirelessly Troubleshooting Troubleshooting How do I extend the range of my wireless network? C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key Troubleshooting Do Belkin products support WPA? Troubleshooting Troubleshooting Enabling WPA-PSK Mimo N1 Mimo Technical Support Local rates applyInformation Europe-European Union NoticeInformation How state law relates to the warranty Restricted Use in Certain Countries

F5D9631-4, PM01522EA specifications

The Belkin PM01522EA, also known as F5D9631-4, is a cutting-edge wireless router designed to meet the connectivity demands of modern households and small offices. With a sleek and compact design, this router is not only functional but also aesthetically pleasing, fitting seamlessly into a variety of environments.

One of the standout features of the F5D9631-4 is its dual-band technology, which operates on both 2.4GHz and 5GHz frequencies. This dual-band functionality allows for greater flexibility and reduced interference, enabling users to connect multiple devices simultaneously without compromising speed. The 2.4GHz band is ideal for everyday activities like browsing and streaming, while the 5GHz band is optimized for high-bandwidth tasks such as online gaming and HD video streaming.

Equipped with advanced wireless standards, the Belkin PM01522EA supports the 802.11n protocol, delivering wireless speeds of up to 300 Mbps. This high-speed capability ensures smooth and efficient data transmission, making it suitable for environments where multiple devices are used at once. The router's range is also impressive, providing extensive coverage that allows users to enjoy a strong and reliable connection throughout their home or office.

Security is a priority for Belkin, and the F5D9631-4 is no exception. It features WPA/WPA2 encryption, which safeguards personal and sensitive information from unauthorized access. The router also incorporates a built-in firewall, adding an extra layer of protection against external threats.

In terms of connectivity, the F5D9631-4 comes equipped with four Ethernet ports, allowing for wired connections to devices such as computers, gaming consoles, and smart TVs. This provides users with the option of enhanced stability and speed for those devices that require a more robust connection.

The setup process of the Belkin PM01522EA is user-friendly and straightforward, often requiring little more than following on-screen instructions. Additionally, the router supports remote management, enabling users to monitor and control their network settings conveniently from anywhere.

In summary, the Belkin PM01522EA, F5D9631-4 is a versatile and efficient wireless router that caters to the needs of modern connectivity. With its dual-band functionality, high-speed performance, robust security features, and straightforward setup, it is an excellent choice for anyone looking to enhance their internet experience at home or in a small office environment.