Belkin F5D9631-4 Changing the Wireless Channel, Using the Wireless Mode Switch, 802.11g Mode

Page 45

Using the Web-Based Advanced User Interface

Table of Contents

sections

1

2

3

4

5

6

7

8

9

10

Changing the Wireless Channel

There are a number of operating channels from which you can choose— in the United Kingdom (and most of Europe), Australia, and most of Asia, there are 13. In other countries, there are other channel requirements.

Your Router is configured to operate on the proper channels for the country in which you reside. The channel can be changed if needed. If there are other wireless networks operating in your area, your network should be set to operate on a channel that is different than the other wireless networks.

Using the Wireless Mode Switch

This switch allows you to set the Router’s wireless modes. There are several modes.

Note: Some modes may require firmware updates to be enabled.

802.11b & 802.11g Mode

In this mode, the Router is compatible with 802.11b and 802.11g wireless clients simultaneously. This is the factory default mode and ensures successful operation with all Wi-Fi-compatible devices. If you have a mix of 802.11b and 802.11g clients in your network, we recommend setting the Router to g and b mode. This setting should only be changed if you have a specific reason to do so.

802.11g Mode

802.11g mode works with 802.11g clients only. This mode is recommended only if you want to prevent 802.11b clients from accessing your network. To switch modes, select the desired mode from the “Wireless Mode” drop-down box. Then, click “Apply Changes”.

802.11b Mode

We recommend you DO NOT use this mode unless you have a very specific reason to do so. This mode exists only to solve unique problems that may occur with some 802.11b client adapters and is NOT necessary for interoperability of 802.11g and 802.11b standards.

off Mode

This option will turn off the wireless functionality.

When to use 802.11b only Mode

In some cases, older 802.11b clients may not be compatible with 802.11g wireless technology. These adapters tend to be of inferior design and may use older drivers or technology. Switching to this mode can solve problems that sometimes occur with these clients. If you suspect that you are using a client adapter that falls into this category of adapters, first check with the adapter vendor to see if there is a driver update. If there is no driver update available, switching to b only mode may fix your problem. Please note that switching to 802.11b only mode will decrease 802.11g performance.

G+ MIMO Wireless Modem Router

43

Image 45
Contents Wireless Modem Router Table of Contents Introduction Advantages of a Wireless NetworkImportant Factors for Placement and Setup Placement of your G+ Mimo Wireless Modem RouterRouter Placement IntroductionCordless Phones Choose the Quietest Channel for your Wireless NetworkSecure Connections, VPNs, and AOL Product Overview Product FeaturesSetup Assistant Built-In Dynamic Host Configuration Protocol DhcpProduct Overview Support for VPN Pass-ThroughSystem Requirements Knowing your Modem RouterKnowing your Modem Router Internet Connection SettingsKnowing your Router Wired-Computer Status Wireless-Computer StatusRouter/Power Status SecurityInternet Status Adsl Line StatusReset Button Connections to Wired Computers YellowResetting the Router Ii. Restoring the Factory DefaultsConnecting and Configuring your modem Router Connecting and Configuring your modem Router Brand-New SetupHardware Connections Replacing an Existing Modem or Modem Router Select Country Set Up the Router Run the Setup Assistant SoftwareConfirmation Screen Progress Screen Checking Settings Verifying Hardware Connections Requesting Internet Account Info if needed Naming your Wireless NetworkConfiguring the Router Checking Internet Connection Congratulations Optional Assistance Connecting Other Computers TroubleshootingSet Up Wireless Security Run the Security Assistant Software Progress Screen Picking the Security Type Creating a Network Key Transferring the Key Verifying the Connection Congratulations Hardware Connections Follow the Quick Installation Guide Alternate Setup MethodLogging into the Router Logging out of the Router Alternate Setup MethodUnderstanding the Web-Based Advanced User Interface Using the Web-Based Advanced User InterfaceUsing the Web-Based Advanced User Interface Internet Settings LAN SettingsFeatures Adsl InfoConnection Type Setting your ISP Connection Type to PPPoE or PPPoA IP assigned by ISP For Dynamic IP connection For Static IP connection Setting your ISP Connection Type to Static IP IPoAUsing the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface Viewing the LAN Settings Changing LAN Settings Subnet Mask IP AddressDhcp Server IP PoolViewing the Dhcp Client List Configuring the Wireless Network SettingsChanging the Wireless Network Name Ssid Using the Wireless Mode Switch Changing the Wireless Channel802.11b & 802.11g Mode 802.11g ModeUsing the Broadcast Ssid Feature Protected Mode Switch 802.11e/WMM Wi-FiMultimedia QoSChanging the Wireless Security Settings Using Wi-Fi Protected Setup WPA2 Requirements Setting WPA/WPA2-Personal PSK Setting WPA-PSK Setting WPA SecuritySetting WEP Encryption Setting MAC Address Control Using a Hexadecimal KeyUsing the Web-Based Advanced User Interface Configuring the Firewall Configuring Internal Forwarding Settings Manually Entering Settings into the Virtual ServerChoosing an Application Setting Client IP Filters Enabling the Demilitarized Zone DMZ Setting MAC Address FilteringSetting up the Router’s Dynamic DNS Update Client Using Dynamic DNSUtilities Restarting the Router Restarting the Router to Restore Normal OperationRestoring Factory Default Settings Saving a Current Configuration Using the Web-Based Advanced User Interface Restoring a Previous Configuration Using the Web-Based Advanced User Interface Updating the Firmware Checking for a New Version of FirmwareDownloading a New Version of Firmware Using the Web-Based Advanced User Interface Updating the Router’s Firmware Using the Web-Based Advanced User Interface Changing System Settings Setting or Changing the Administrator PasswordChanging the Login Time-Out Setting Enabling Remote Management Setting the Time and Time ZoneEnabling/Disabling UPnP Enabling/Disabling Auto Firmware UpdateManually Configuring Network Settings in Mac OS up to Manually Configuring Network SettingsManually Configuring Network Adapters in Mac OS X Manually Configuring Network SettingsManually Configuring Network Settings Obtain DNS server address automatically 3. Click OK Manually Configuring Network Adapters in Windows 98 or Me Microsoft Internet Explorer 4.0 or Higher Recommended Web Browser SettingsNetscape Navigator 4.0 or Higher Recommended Web Browser SettingsTroubleshooting ProblemSolution Troubleshooting Setup Assistant cannot find my Router Setup Assistant cannot connect my Router to the Internet Troubleshooting Can’t connect to the Internet wirelessly Troubleshooting Troubleshooting How do I extend the range of my wireless network? C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key Troubleshooting Do Belkin products support WPA? Troubleshooting Troubleshooting Enabling WPA-PSK Mimo N1 Mimo Local rates apply Technical SupportEurope-European Union Notice InformationInformation How state law relates to the warranty Restricted Use in Certain Countries

F5D9631-4, PM01522EA specifications

The Belkin PM01522EA, also known as F5D9631-4, is a cutting-edge wireless router designed to meet the connectivity demands of modern households and small offices. With a sleek and compact design, this router is not only functional but also aesthetically pleasing, fitting seamlessly into a variety of environments.

One of the standout features of the F5D9631-4 is its dual-band technology, which operates on both 2.4GHz and 5GHz frequencies. This dual-band functionality allows for greater flexibility and reduced interference, enabling users to connect multiple devices simultaneously without compromising speed. The 2.4GHz band is ideal for everyday activities like browsing and streaming, while the 5GHz band is optimized for high-bandwidth tasks such as online gaming and HD video streaming.

Equipped with advanced wireless standards, the Belkin PM01522EA supports the 802.11n protocol, delivering wireless speeds of up to 300 Mbps. This high-speed capability ensures smooth and efficient data transmission, making it suitable for environments where multiple devices are used at once. The router's range is also impressive, providing extensive coverage that allows users to enjoy a strong and reliable connection throughout their home or office.

Security is a priority for Belkin, and the F5D9631-4 is no exception. It features WPA/WPA2 encryption, which safeguards personal and sensitive information from unauthorized access. The router also incorporates a built-in firewall, adding an extra layer of protection against external threats.

In terms of connectivity, the F5D9631-4 comes equipped with four Ethernet ports, allowing for wired connections to devices such as computers, gaming consoles, and smart TVs. This provides users with the option of enhanced stability and speed for those devices that require a more robust connection.

The setup process of the Belkin PM01522EA is user-friendly and straightforward, often requiring little more than following on-screen instructions. Additionally, the router supports remote management, enabling users to monitor and control their network settings conveniently from anywhere.

In summary, the Belkin PM01522EA, F5D9631-4 is a versatile and efficient wireless router that caters to the needs of modern connectivity. With its dual-band functionality, high-speed performance, robust security features, and straightforward setup, it is an excellent choice for anyone looking to enhance their internet experience at home or in a small office environment.