Manually Configuring your Router
VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here (assigned by your ISP).
Encapsulation – Select LLC or VC MUX (assigned by your ISP).
Setting your ISP Connection Type to Classical IP over ATM (CLIP)
Enter (CLIP) information in the provided spaces, and click “Next”. This information is provided by your ISP.
IP Address – Enter the WAN IP address provided by your ISP. Subnet Mask – Enter a subnet mask provided by your ISP.
Default Gateway – Enter a default gateway IP address. If the Router cannot find the destination address within its local network, it will forward the packets to the Default Gateway (assigned by your ISP).
1
2
3
4
5
6
7
8
9
10
section
25