Belkin F5D7632UK4 user manual System Settings, Setting or Changing the Administrator Password

Manually Configuring your Router

Allow Incoming ICMP Echo Requests: Choose this box if you want to allow ping or traceroute commands under DOS prompt.

Allow Incoming UDP Traceroute Queries: Choose this box if you want to allow UDP traceroute requests.

System Settings

The “System Settings” page is where you can enter a new administrator password, set the time zone, and turn on and off the UPnP function of the Router.

Setting or Changing the Administrator Password

The Router ships with NO password entered. If you wish to add a password for greater security, you can set a password here. Write down your password and keep it in a safe place, as you will need it if you need to log into the Router in the future. It is also recommended that you set a password if you plan to use the remote management feature of your Router.

Changing the Login Time-Out Setting

The login time-out option allows you to set the period of time that you can be logged into the Router’s advanced setup interface. The timer starts when there has been no activity. For example, you have made some changes in the advanced setup interface, then left your computer alone without clicking “Logout”. Assuming the time-out is set to three minutes, then three minutes after you leave, the login session will expire. You will have to log into the Router again to make any more changes.

48