Barco II manual Remote Commands, Ich

5. Remote Commands

The following commands have been updated as of software release 02.00.02.

ICH

Description: Input Channel Settings

Required parameters: --con (connector) --ch (channel)

--itype (input type), only for commands to DVI connector

Parameters:
--con (connector)		: 0-5, see below for input connector numbers.
--ch (channel)		: 0-1, input channel
--itype (input type) : 0 = digital, 1 = analog
--iwin		: option to set input window
--hpos	(Input Window H Position, pixels)
--vpos	(Input Window V Position, pixels)
--hsize	(Input Window H Size, pixels)
--vsize	(Input Window V Size, pixels)
--mask		: option to set the mask window
--left	(Mask Left in percentage)
--right	(Mask Right in percentage)
--top	(Mask Top in percentage)

--bottom (Mask Bottom in percentage)

--at (aspect ratio type) : 0-6, see below for aspect ratio numbers

--ar (custom aspect ratio) : 0.25 - 10.00, custom aspect ratio. artype must be set to 0

Examples:

ICH --con 3 --ch 0 --at 6 --ar 1.91

Update DP input, aspect ratio type to Custom, and custom aspect ratio to 1.91

ICH --con 0 --itype 0 --ch 0 --iwin --hpos 10

Update DVI (digital in) input, Input Window H Position to 10

ICH --con 1 --ch 0 --mask --left 45.10

Update HD-15 input, Mask Left by 45.10%
Query Format 1 (Aspect ratio): ICH --con (connector) --	ch (channel) --?
Query Response 1 : Input Channel Aspect Ratio Setting in the following format
ICH --at (AR type) --ar (Custom AR)
26-0904001-00 Rev 00.00	13