=Hdmi, Imgr | Barco II guide


Query Format 2 (Input window): ICH --			con (connector) --ch (channel) --		iwin --?
Query Response 2 : Input Channel Window Setting in the following format
ICH --	hpos (H Position)	--vpos (V Position)		--hsize (H Size) --vsize (V Size)
Query Format 3 (Mask): ICH --		con (connector) --ch (channel) --mask --			?
Query Response 3 : Input Channel Mask Setting in the following format
ICH --	left (Left) --right (Right) --		top (Top)	--bottom (Bottom)

Connectors:

0=DVI

1=HD15

2=HDMI

3=DP

4=SDI1

5=SDI2 (available when Dual option mezzanine installed)

Aspect Ratio type 0=1:1 1=3:2 2=4:3 3=5:4 4=16:10 5=16:9

6=Custom. Use --ar to specify actual aspect ratio

Description: Input Manager Settings

Parameters:
--acq (acquire mode)	: 0 = Off, 1 = On
--con (active connector) : 0-7, see below for connector numbers
--frz (freeze mode)	: 0 = Off, 1 = On
--save (save input configuration)
--recall (recall input configuration)
--reset (reset input configuration)
Query Format: IMGR --?
Query Response: Input Manager Settings in the following format
IMGR --acq (acquire mode) --	con (active connector) --frz (freeze mode)