Barco 3G/HD/SD-SD, HD/3G SDI Switching time, Configuring protocol options, Tcp/Ip, RS232

Page 19

MatrixPRO-II 3G/HD/SD-SDI Routers

Rev. 1.1

3.5Switching time

Switching is performed according to the detected sync reference signal. Switching time is determined by the synchronization signal that feeds the router. This is useful when the video signal has the same format as the synchronization signal. Supported formats are: PAL, NTSC, 750/50p, 750/60p, 1125/50i and 1125/60i.

3.6Configuring protocol options

TCP/IP

This is the default option for the Barco MatrixPRO-II HD/3G SDI routers. Selecting this protocol disables the RS-232 port of that device.

RS232

The serial protocol can be selected from the configurator software. Selecting the RS232 protocol disables the Ethernet port of that device.

Default IP Address: 192.168.0.245 - Port: 4381

RS-232 parameters:

-Bit rate: 19200 bit/s

-Data bits: 8

-Stop bits: 1

-Parity: no parity

Connection to the router will be lost after 20 seconds of inactivity

MatrixPRO-II HD/3G SDI Series –User’s Guide - Rev. 1.1

19

Image 19

Contents MatrixPRO-II Copyright Trademarks Company Address Operators Safety Summary Terms in This Manual and Equipment Marking Change History Contents Appendix C Barco MPII-3G Configuration Tool 1RU, Depth 5cm Product versions2RU, depth 5cm Control Function Description Connector Specifications MechanicsWeight and power consumption Device Current, +15V Power Power SupplySignal transition Video specifications Supported formatsElectrical signal inputs Electrical signal outputsSync Power aPower B Configuration− 1 layer ConfigurationRouter mode Router layers 8x8 router 16x16 router 32x32 routerMatrixPRO-II 3G/HD/SD-SDI Routers Rev − 3 layers, based on a 32x32 router Layer Input Output − 3 layers, based on a 16x16 router Layer Input OutputMatrixPRO-II 3G/HD/SD-SDI Routers Rev OFF RS232 Switching timeConfiguring protocol options TCP/IPEthernet states Alarm statesDescription LED state Alarm Comment LED status indication Start-upMaximum cable length RS-232 Pin # RS-232 modeRouter communication Serial connectionEthernet connection Panel Enable Button Color Video Enabled Audio EnabledControl Panel operation Button description A/V Toggle Take Take on/offEnvironmental Specifications Toxic or hazardous substances and elements Appendix a Materials declarationPBB Pbde Recycling information Description Declarations of ConformityLlist PingDest SrcEcho Request X-Point StatusRouter Ping Command Ping*CCLFLF Response ? pingLF pongLF *CCLF LFAppendix C Barco MPII-3G Configuration Tool