IBM GC23-7753-05 manual + ifxdeploy.conf File Template

+ifxdeploy.conf File Template

+	The following shows the contents of the ifxdeploy.conf file.
+	#	Licensed Material - Property Of IBM
+	#
+	#	"Restricted Materials of IBM"
+	#
+	#	IBM Informix Dynamic Server
+	#	Copyright IBM Corporation 2009 All rights reserved.
+	#
+	#	Title:	ifxdeploy.conf
+	#	Description: Configuration file for the IDS Deployment Utility
+	#
+	#	Uncomment any values that you want to change from the default values.
+	#
+	#	Note that any parameters set on the command line will override these values.
+
+	# Primary server values
+	#	- These values define the primary server name, protocol, and port.
+	#	- Use the BEGIN ALIAS section to define additional sever names and
+	#	protocols (such as DRDA).
+
+	# INFORMIXSERVER - Set the primary server name, or set it as an environment
+	#		variable or command line parameter.
+	#INFORMIXSERVER
+
+	# PROTOCOL1 - Set the primary protocol (the sqlhosts NETTYPE field) for the
+	#		primary server.
+	#		- Values: onsoctcp, onipcnmp
+	#PROTOCOL1 onsoctcp
+
+	# PORT1 - Set the primary listening port for the primary server (not needed for
+	#	onipcnmp).
+	#		- Range: 1-32767
+	#PORT1 9088
+
+	# SERVERNUM - Set the primary server number (the value for the SERVERNUM
+	#		configuration parameter).
+	#		- Range: 0-255
+	#SERVERNUM
+
+	# INFORMIXSQLHOSTS - Set a value for the INFORMIXSQLHOSTS environment
+	#		variable. On UNIX this value specifies the sqlhosts file
+	#		(default is $INFORMIXDIR/etc/sqlhosts). On Windows, this
+	#		value is generally not used but can be used to point to a
+	#		remote machine (for example, \\machinename) whose registry
+	#		contains SQLHOSTS information.
+	#INFORMIXSQLHOSTS
+
+	# Define additional server names and listeners with the BEGIN/END ALIAS
+	# statements.
+	# Each ALIAS results in a new SQLHOSTS entry and a new value for the
+	# DBSERVERALIASES configuration parameter in the onconfig file.
+	# For example:
+	#BEGIN ALIAS
+	#SERVERNAME alias1
+	#PROTOCOL drsoctcp
+	#PORT 9091
+	#OPTIONS # optional SQLHOSTS parameters (for example, b=32767 to set buffers)
+	#END ALIAS
+
+	# INFORMIXDIR - Set the location of the installation directory.
+	#		- Alternatively, set the INFORMIXDIR environment variable.
+	#INFORMIXDIR
+
+	# ONCONFIG - Set the onconfig file.
+	#	- If not specified and the ONCONFIG environment variable is not set,

Chapter 5. Deploying IDS with the Deployment Utility 5-13