vError codes and messages
vError correcting code (ECC) double-data-rate (DDR) synchronous dynamic random access memory (SDRAM) with serial presence detect (SPD)
vError logging of POST failures
vHot-swap SCSI hard disk drives
vIntegrated Ethernet controller
vSupport for the optional IBM Remote Supervisor Adapter II
vKey-lock support for physical security
vMemory change messages posted to the error log
vPower-on self-test (POST)
vPredictive Failure Analysis® (PFA) alerts
vRead-only memory (ROM) checksums
vRedundant Ethernet capabilities (requires an optional Ethernet adapter) with failover support
vSimple-swap Serial ATA hard disk drives
vStandby voltage for system-management features and monitoring
vSystem auto-configuring from the configuration menu
vSystem-error LED on the front bezel and diagnostics LEDs on the system board
vUpgradeable basic input/output system (BIOS) and POST code
vUpgradeable microcode for POST, BIOS, and read-only memory (ROM) resident code, locally or over a LAN
vVital product data (VPD); includes serial-number information and replacement part numbers, stored in nonvolatile memory, for easier remote maintenance
vWake on LAN® capability