IBM LE-565 user manual Enhanced IDE & CF Interface, Jcfsel Mode

Page 18

LE-565 User’s Manual

Hardware Setup

2.6 <Enhanced IDE & CF Interface>

The board supports two enhanced IDE interface, dual channel for 4 ATAPI devices with ATA33. Based on embedded application, the board has one 44-pin IDE connector +5V supported for disk on module.

The board also provides a Compact Flash Type II socket with jumper (JCFSEL) selectable slave/Master mode on secondary IDE channel.

Jumper: JCFSEL

Type: onboard 3-pin header

JCFSEL Mode

1-2		Master
2-3		Slave

Default setting

31

JCFSEL

18	Enhanced IDE&CF Interface

Image 18

Contents User’s Manual EditionLE-565 User’s Manual DisclaimerTrademark Cable Kit Packing ListHardware Printed MattersIndex Chapter1BIOS Auto Flash Tool 2Flash Method Is Left For Blank Introduction Product OverviewProduct Specification Multi-I/O PortVGA Display Interface Audio Interface Power and EnvironmentEthernet Interface Expansive InterfaceMechanical Drawing Block Diagram Eden nanoBGA2Hardware Setup Connector LocationDcin Jumper Reference Jumper FunctionExternal Connector Connector ReferenceInternal Connector Connector Function RemarkCPU and Memory Setup 1 CPUMemory Cmos ATX Setup ModeJcfsel Mode Enhanced IDE & CF InterfaceSerial ATA Interface Floppy Port LAN Interface Onboard Display Interface Analog VGA InterfaceOnboard Display Interface Digital Display Jvlcd JvlcdPin Signal Pin DescriptionLCD Installation Guide Preparing the LS-570,LCD panel and the backlight inverterResolution Color Channel LE-565 Bios panel type selection formOnboard Audio Interface 12 USB2.0 Interface Interface USB2.0VCC Gpio Interface Serial Port Jumper Setting JCSEL1 JCSEL2JCSEL2 JCSEL11 Power and Fan Connector Power InputPower Output Fan ConnectorPin Description Ground +12V Fan Control Indicator and Switch PINThis Page is Left For Blank System Configuration Sata RAID ConfigurationLE-565 User’s Manual Audio Configuration Display Configuration LE-565 User’s Manual System Configuration Please select S3Display for advanced device setting LE-565 User’s Manual This Page is Left for Blank Bios Setup 1CMOS Setup Utility Main ScreenThis Page is Left for Blank Appendix a I/O Port Pin Assignment IDE PortIORDY/DDMARDY IrDA Port CRT Port Serial ATA PortSerial Port LAN Port PinThis Page is Left for Blank Appendix B Flash Bios Bios Auto Flash ToolFlash Method This Page is Left for Blank Contact Information Taiwan Commate Computer Inc