IBM LE-565 user manual System Configuration, Sata RAID Configuration

Page 37

LE-565 User’s Manual

System Configuration

Chapter 3 <System Configuration>

3.1 <SATA RAID Configuration>

The board supports two Serial ATA ports onboard, and supports RAID 0, 1 and JBOD disk array, the RAID 0, 1 and JBOD are specified below:

RAID 0 (Stripping): Two hard drives operating as one drive for optimized data R/W performance. It needs two unused drives to build this operation.

RAID 1 (Mirroring): Copies the data from first drive to second drive for data security, and if one drive fails, the system would access the applications to the workable drive. It needs two unused drives or one used and one unused drive to build this operation. The second drive must be the same or lager size than first one.

JBOD (Span): As different as RAID 0, the JBOD combines two disks as one without any fault tolerance and I/O performance enhancement.

To build Serial ATA disk array, please press <TAB> while booting up the system before entering OS, and follow the instructions to edit the RAID function.

(Selectable Functions)

(Option Instruction)

(Disk Statement)

SATA RAID Configuration

37

Image 37
Contents Edition User’s ManualDisclaimer LE-565 User’s ManualTrademark Hardware Packing ListCable Kit Printed MattersChapter Index1BIOS Auto Flash Tool 2Flash Method Is Left For Blank Product Overview IntroductionMulti-I/O Port Product SpecificationVGA Display Interface Ethernet Interface Power and EnvironmentAudio Interface Expansive InterfaceMechanical Drawing Eden nanoBGA2 Block DiagramConnector Location Hardware SetupDcin Jumper Function Jumper ReferenceInternal Connector Connector ReferenceExternal Connector Connector Function Remark1 CPU CPU and Memory SetupMemory Mode Cmos ATX SetupEnhanced IDE & CF Interface Jcfsel ModeSerial ATA Interface Floppy Port LAN Interface Analog VGA Interface Onboard Display InterfaceOnboard Display Interface Jvlcd Jvlcd Digital DisplayPin Description Pin SignalPreparing the LS-570,LCD panel and the backlight inverter LCD Installation GuideLE-565 Bios panel type selection form Resolution Color ChannelOnboard Audio Interface Interface USB2.0 12 USB2.0 InterfaceVCC Gpio Interface JCSEL1 JCSEL2 Serial Port Jumper SettingJCSEL2 JCSEL11 Power Input Power and Fan ConnectorFan Connector Power OutputPin Description Ground +12V Fan Control PIN Indicator and SwitchThis Page is Left For Blank Sata RAID Configuration System ConfigurationLE-565 User’s Manual Audio Configuration Display Configuration LE-565 User’s Manual System Configuration Please select S3Display for advanced device setting LE-565 User’s Manual This Page is Left for Blank 1CMOS Setup Utility Main Screen Bios SetupThis Page is Left for Blank IDE Port Appendix a I/O Port Pin AssignmentIORDY/DDMARDY IrDA Port Serial ATA Port CRT PortSerial Port Pin LAN PortThis Page is Left for Blank Bios Auto Flash Tool Appendix B Flash BiosFlash Method This Page is Left for Blank Taiwan Commate Computer Inc Contact Information