IBM LE-565 user manual Appendix B Flash Bios, Bios Auto Flash Tool, Flash Method

Page 52

LE-565 User’s Manual

Flash BIOS

Appendix B <Flash BIOS>

B.1 BIOS Auto Flash Tool

The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can download the tool online at the address below:

http://wwwUT.award.comTU

http://wwwUT.commell.com.tw/support/support.htmTU

File name of the tool is “awdflash.exe”, it’s the utility that can write the data into the BIOS flash ship and update the BIOS.

B.2 Flash Method

1.Please make a bootable floppy disk.

2.Get the last .bin files you want to update and copy it into the disk.

3.Copy awardflash.exe to the disk.

4.Power on the system and flash the BIOS. (Example: C:/ awardflash XXX.bin)

5.Re-star the system.

Any question about the BIOS re-flash please contact your distributors or visit the web-site at below:

http://www.commell.com.tw/support/support.htm

52

BIOS Auto Flash Tool

Image 52
Contents User’s Manual EditionDisclaimer LE-565 User’s ManualTrademark Packing List HardwareCable Kit Printed MattersIndex Chapter1BIOS Auto Flash Tool 2Flash Method Is Left For Blank Introduction Product OverviewMulti-I/O Port Product SpecificationVGA Display Interface Power and Environment Ethernet InterfaceAudio Interface Expansive InterfaceMechanical Drawing Block Diagram Eden nanoBGA2Hardware Setup Connector LocationDcin Jumper Reference Jumper FunctionConnector Reference Internal ConnectorExternal Connector Connector Function Remark1 CPU CPU and Memory SetupMemory Cmos ATX Setup ModeJcfsel Mode Enhanced IDE & CF InterfaceSerial ATA Interface Floppy Port LAN Interface Analog VGA Interface Onboard Display InterfaceOnboard Display Interface Digital Display Jvlcd JvlcdPin Signal Pin DescriptionLCD Installation Guide Preparing the LS-570,LCD panel and the backlight inverterResolution Color Channel LE-565 Bios panel type selection formOnboard Audio Interface 12 USB2.0 Interface Interface USB2.0VCC Gpio Interface Serial Port Jumper Setting JCSEL1 JCSEL2JCSEL2 JCSEL11 Power and Fan Connector Power InputFan Connector Power OutputPin Description Ground +12V Fan Control Indicator and Switch PINThis Page is Left For Blank System Configuration Sata RAID ConfigurationLE-565 User’s Manual Audio Configuration Display Configuration LE-565 User’s Manual System Configuration Please select S3Display for advanced device setting LE-565 User’s Manual This Page is Left for Blank Bios Setup 1CMOS Setup Utility Main ScreenThis Page is Left for Blank Appendix a I/O Port Pin Assignment IDE PortIORDY/DDMARDY IrDA Port Serial ATA Port CRT PortSerial Port LAN Port PinThis Page is Left for Blank Bios Auto Flash Tool Appendix B Flash BiosFlash Method This Page is Left for Blank Contact Information Taiwan Commate Computer Inc