TRENDnet TPE-80WS manual Hardware Installation

2.Hardware Installation

1.Connect the Power Cord to the rear of the TPE-80WS and then to a power outlet.

2.Connect a RJ-45 network cable from the computer to an available Ethernet port on the TPE-80WS.

3.Connect a RJ-45 cable from a PoE port on the TPE-80WS to the LAN Port of the PoE device (e.g.

TEW-434APB)

4.Verify that the following panel lights are on: POWER, OPERATING and

LINK/ACT

2

English