SPECIFICATIONS AND OPERATION
9.Page/Line Mode Switch
The TSP400 series supports two entirely different command sets: “Page Mode” and “Line Mode.” You can select the mode either by software or from the control panel. To select from the control panel, proceed as follows.
NOTE: This function will not become meaningful until Line Mode software has been introduced.
1Hold down the ON LINE button while switching on the power, then continue to hold it down until you hear a triple beep. (This will take about five seconds.)
2Press the ON LINE button to select Page Mode (the buzzer beeps once), or press the FEED button to select Line Mode (the buzzer beeps twice).
– 13 –