Star Micronics SP300 Series manual Set n/216-inch line feed simulation ESC 3 n 1BH 33H n

FUNCTION

CODE

DEFINITION RANGE

OUTLINE

Set n/216-inch line feed simulation

<ESC> “3” n (1B)H (33)H n

1 n 255

Line feed is set at n/216-inch after this code is received. According to the minimum paper feed pitch of the connected mechanism, the amount of line feed is set as follows:

For 1/72”-pitch mechanisms: INT {(n/3)}/72-inch.

For 1/144”-pitch mechanisms: INT {(2n/3)+0.5}/144-inch.

FUNCTION

CODE

DEFINITION RANGE

OUTLINE

FUNCTION

CODE

DEFINITION RANGE

OUTLINE

Set n/144-inch line feed

<ESC> “y” n (1B)H (79)H n

1 n 255

Line feed is set at n/144-inch after this code is received. * 1/72-inch type mechanism only

8 dot single density bit image

<ESC> “K” n1 <0> m1 m2 ...

(1B)H (4B)H n1 (00)H m1 m2 ...

1 n1 200

Excutes 8 dot bit image print determined by “n1”. The total number of bit image data bytes in one line is equal to n1. The printer ignores any data bytes over the specified amount allowed in one line. When the bit image print is finished the printer automatically returns to the character mode.

	MSB			Image		data		LSB
Dot Position		D8	D7	D6	D5	D4	D3	D2	D1

1

2

3

4

5

6

7

8

9 (Not Used)

– 42 –