Star Micronics SP300 Series manual Function

Page 55

FUNCTION

CODE

OUTLINE

FUNCTION

CODE

OUTLINE

Set deselect mode

<DC3> (13)H

(1)When using serial interface printer:

This function differs depending on the setting of DIP switch 4.

a)When the DC1, DC3 invalid mode is set (DIP switches 4-1 to 4-4 are all set to ON), the printer ignores this code.

b)In the DC1, DC3 valid mode (with DIP switches 4-1 to 4-4 set to OFF), data following this code is ignored when the printer receives a <DC3> code.

The deselect mode is canceled by <DC1> code.

c)If the printer receives a <DC3> code during an addressable mode (with DIP switches 4-1 to 4-4 set to settings other than a) and b) above,), the data follow- ing this code is ignored.

Deselect mode can be canceled by a <DC1> n code. Note that addressable mode is valid only when the RS- 422A interface option is installed.

(2)When using parallel interface printer;

Data following this code is ignored when the printer receives a <DC3> code.

The deselect mode is canceled by <DC1> code.

Set select mode

When using serial interface printer; <DC1> or <DC1>n

(11)H or (11)H n

When using parallel interface printer <DC1>

(11)H

(1)When using serial interface printer;

This function differs depending on the setting of DIP switch 4.

a)When the DC1, DC3 invalid mode is set (DIP switches 4-1 to 4-4 are all set to ON), the printer ignores this code.

b)In the DC1, DC3 valid mode (with DIP switches 4-1 to 4-4 set to OFF), when the printer receives a <DC1> code, the deselect mode is canceled and data follow- ing this code is input to the buffer.

– 51 –

Image 55
Contents Dot Matrix Printer SP300 Series Programmer’s Manual Page Table of Contents IBM Character Set #1 DIP SW2-1 OFF, SW2-2 on Basic Operation LED flashes Validation printing mode is setSelf Print Test Switch Operation Combined Switch OperationMicro Feed Feed + on Line + Power on Page Page Parity bit Odd, even or none Interface SpecificationsTo Installation Manual Selectable. Refer to InstallationInput TTY-RXD, TTY-RXDR Output DTR, FAULT, TXD, RCH, RTSInterface Circuit Input RXD, CTSOutput SD, CS Input RD, RSRS-232C Connectors and SignalsRS-422A option MA current loop optionExample of interface connections for IBM PC Interface ConnectionsInstalling the optional interface board Installing the Optional Interface BoardData Structure DTR modeDTR Mark DTR Space This mode accessed when the DIP switch 3-5 is OFF ON/X-OFF modeOFF Status STX-ETX mode Page STX-ETX mode flow diagram for host computer Logic level Compatible with TTL level Handshaking Busy signalsInterface Timing PulsesTypical interface circuit Amphenol 57-30360 connector This connector mates with anEmergency Suspension This printer can print one line of validation printing Operating MethodGS data LF Printing FormatData format OtherOther position to be observed Cutting MethodCutting position Auto cutting control codesControl Codes Used for Line Spacing Control Codes Used for Character SettingControl Code Used for Graphics Printing Control Codes Used for Page LayoutControl Codes Used for Download Characters Other Control Codes Control Codes Used for Peripheral UnitsFunction Function Function Function Control Codes Used for Line Spacing Sets page length at n inches Set 1/8-inch line feed ESC 0 1BH 30HSet vertical tab positions Left end Printing area Left margin n Right margin n columns Set horizontal tab position Control Codes Used for Graphics Printing Set n/216-inch line feed simulation ESC 3 n 1BH 33H n Example Printing Possible Code Outline Definition of download characters When the 5 × 9 font is setCode Outline Example Example of transmitting data 10 × n1 ms 10 × n2 ms Printing and paper feed are prohibited Other Control Codes Function Initialize printer ESC @ 1BH 40H 03H ETXFunction U.S.A. & Europe DIP SW2-1 ON, SW2-2 on Character Code TablesPage IBM Character Set #1 DIP SW2-1 OFF, SW2-2 on Page IBM Character Set #2 DIP SW2-1 ON, SW2-2 OFF Page Japan DIP SW2-1, OFF, SW2-2 OFF Page International Character Sets Memo Page Overseas Subsidiary Companies Star Micronics AMERICA, INC