Star Micronics HA15 80825072, LC-1521, LC-1511, DOT MATRIX PRINTERS Adjusting for paper thickness

	Adjusting for paper thickness 63
Labels	4.5″ to 16.5″ / 114 to 419mm
Backing sheet:
Thickness	0.00276″ to 0.0035″ / 0.07 to 0.09mm
Backing sheet:
Total:	0.0075″ / 0.19mm

• Use labels under normal temperature and humidity conditions only.

Adjusting for paper thickness

Paper comes in different weights, normally expressed as gsm (grams per square meter) or lbs (pounds). Some forms paper also have multiple pages that make them quite thick. Use the following procedure to change the gap between the print head and the platen and adjust for paper thickness.

1

2

3

4

5

6

❏Move the adjustment lever to one of its four settings. Position 2 is most suitable for single-sheet paper.