Star Micronics LC-1021 user manual Left margin moves to Paper is not loaded

56Optional Accessories

Problem	Possible Cause	Recommended Action
Left margin moves to the	The paper is not loaded	Remove all paper from the
right during printing.	correctly, causing the print	printer and reload it. Try
	head to jam.	printing again.
	The ribbon cassette is not	Make sure that the ribbon
	installed correctly, causing	cassette is installed
	the print head to jam.	correctly. See “Installing the
		ribbon cassette” on page 6.
	The printer is not set up	Set up the printer for the
	correctly for the thickness of	paper thickness you are
	paper being used.	using. See “Adjusting for
		paper thickness” on
		page 42.
	Inappropriate settings are	Choose different settings in
	selected by your application	your application.
	program.
	Static electricity caused by	Make sure that the printer is
	interference from nearby	not too close to any devices
	electrical devices or by low-	with electric motors or try to
	level humidity is affecting	raise the humidity level.
	printer operation.
Some characters are printed	Static electricity caused by	Make sure that the printer is
incorrectly.	interference from nearby	not too close to any devices
	electrical devices or by low-	with electric motors or try to
	level humidity is affecting	raise the humidity level.
	printer operation.
	Inappropriate settings are	Choose different settings in
	selected by your application	your application.
	program.
	Wires are missing from the	Return the printer to your
	print head.	dealer for repair.