Wireless
This section enables users to configuration the wireless communications parameters for the WLAN Router.
Basic
This page allow user to enable and disable the wireless LAN function, create a SSID, and select the channel for wireless communications.
Enable/Disable: Enables or disables wireless LAN via the WLAN Router.
SSID: Type an SSID in the text box. The SSID of any wireless device must match the SSID typed here in order for the wireless device to access the LAN and WAN via the WLAN Router.
Channel: Select a transmission channel for wireless communications. The channel of any wireless device must match the channel selected here in order for the wireless device to access the LAN and WAN via the WLAN Router.
802.11Mode: Select one of the following:
z802.11b only - Select if you are using 802.11b wireless clients only. z802.11g only - Select if you are using 802.11g wireless clients only. z802.11n only - Select if you are using 802.11n wireless clients only.
zMixed 802.11b and 802.11g - Select if you are using both 802.11b and 802.11g wireless clients.
zMixed 802.11n, 802.11g, and 802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.
Channel Width: Select the Channel Width:
30