HDMI Auto Detection Function

The product's video output will automatically change to HDMI mode when connecting an HDMI cable before power is on. For possible HDMI resolutions, see page 31.

This function is not available if the HDMI cable does not support CEC.

HDMI connection description

-HDMI outputs only a pure digital signal to the TV.

-If your TV does not support HDCP, random noise appears on the screen.

What is the HDCP?

HDCP (High-band width Digital Content Protection) is a system for protecting BD/DVD content outputted via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

!CAUTION

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the product.

Connecting the FM Antenna

02 Connections

FM Antenna (supplied)

FM ANT

WIRELESS

iPod

DIGITAL AUDIO IN

OPTICA

1.Connect the FM antenna supplied to the FM ANT Jack.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

NOTE

This product does not receive AM broadcasts.

Attaching the Toroidal Ferrite Core to the Speaker Cables of the Main Unit

If you attach a Toroidal ferrite core to the Speaker Cables of the man unit, it will help to prevent RF interference from radio signals.

1.Pull the fixing tab of the Toroidal ferrite core to open it.

2.Make a loop once in the Speaker Cables.

3.Attach the Toroidal ferrite core to the Speaker Cables of the Main Unit as the figure shows and press it until it clicks.

FM ANT

WIRELESS

iPod

SPEAKER IMPEDANCE : 3

English 23

Page 23
Image 23
Samsung HT-C5900/XER, HT-C5950/XER, HT-C5950P/XER manual Hdmi Auto Detection Function, Connecting the FM Antenna