Svenska | Nederlands | Italiano | Français | Español | Deutsch | Dansk |
YOUR SL2 WIRELESS SURROUND LINK |
|
|
|
| ||
English
Connecting the SL2 transmitter
Use the supplied transmitter cable to connect the SL2 transmitter to your Acoustimass® module, as follows (Figure 3):
1.Insert the single RCA connector at one end of the cable into the RCA jack labeled Acoustimass Module on the back of the SL2 transmitter.
2.Connect the other end of the transmitter cable to jacks on the Acoustimass module.
•Insert the connector marked RS into the jack labeled Right Rear or Surround R.
•Insert the connector marked LS into the jack labeled Left Rear or Surround L.
3.Connect the cable end of the transmitter power pack to the small jack labeled DC Power on the back of the SL2 transmitter.
4.Plug the transmitter power pack into a nearby AC mains outlet.
Figure 3 |
| Acoustimass module |
Transmitter |
|
|
connections | Status LED |
|
|
| |
| SL2 transmitter | Transmitter |
| power | |
|
| |
|
| pack |
Transmitter |
|
cable | Surround |
| |
| speaker jacks |
When the power supply is plugged in, a Status LED on the back of the transmitter blinks green.
6
