Bose manual Making the connections, Positioning the SL2 transmitter and receiver

English

Dansk Deutsch Español Français Italiano Nederlands Svenska

YOUR SL2 WIRELESS SURROUND LINK

Positioning the SL2 transmitter and receiver

Radio frequency transmissions make this product easy to place. With no need to point the SL2 transmitter at its receiver, you can hide the two from view if you like.

The SL2 transmitter, which is labeled on the back, is also distinguished by the single RCA jack (Figure 2). The SL2 receiver, also labeled on the back, has two RCA jacks.

1.Place the SL2 transmitter within 6 feet (2 meters) of the Acoustimass® module. Make sure it is within reach of an AC (mains) outlet.

2.Place the SL2 receiver at the same end of the room as your surround speakers. It, too, should be within reach of an AC (mains) outlet.

You can position the transmitter/receiver pair:

•From 2 feet (.6 meters) to 30 feet (9.2 meters) apart

•Upright on the floor, under a sofa or chair, or behind furnishings

•Where the sides are unobstructed to allow for ventilation

Making the connections

Use the small power pack with the SL2 transmitter (Figure 2). The large power pack connects to the SL2 receiver.

Figure 2 SL2 transmitter SL2 receiver

Different power supplies

Receiver

power pack

Transmitter power pack

Connect the supplied power cord to the receiver power pack before you plug it into the wall. Your transmitter power pack may also include a separate power cord. If so, connect that cord to the transmitter power pack before plugging it into the wall.

5