TRENDnet Powerline Network Solution, TPL-305E manual Click Enter Password

Privacy Tab

Change the

Network

Name/Security Key

Local

Device

The closest powerline adapter(s) that connects your computer to the electrical system.

Remote

Devices

Powerline
adapters that
are connected to				Closes the
the selected
				utility
Local Device
				application.
across the	Rename	Enter the
			Add a	Scans for
electrical	the	Device	Remote	Remote
system.	selected	Password	Device that	Devices that
	Remote	(DPW) for the	was not	were not
	Device	selected	detected	detected
		Remote
		Device

∙To apply changes to Remote Devices through the Powerline Configuration Utility, you must enter the Device Password (DPW) for each Remote Device located on the Device Label.

∙If you have not already done so, please write down the 16-digit Device Password (DPW) and corresponding MAC Address of each TPL-305E powerline adapter as this will be required to apply changes to remote devices discovered in the utility. This is located on the Device Label, please refer to Section 1.4.

Enter the 16-digit Device Password (DPW) for each Remote Device in the utility

1.Click one of the Remote Devices in the list.

2.Click Enter Password.

3.Type in the Device Password according to the corresponding MAC address. Then click OK.