4. If successful, the Remote Device will have the Device Password listed next to the device under Password.
Note: If the incorrect Device Password is entered, you will receive an error message. Click Enter Password and try entering the password again.
5.Repeat steps
6.Once all of the Device Passwords (DPW) are entered into the utility, changes can be applied to the Remote Devices using the utility.
Change the Network Name/Security Key for multiple adapters using the utility
1.Click the Privacy tab.
2.Under Private Network Name, enter the desired network name/security key and click Set All Devices.
3.At the Network Name Setting prompt window, click OK.
The current network name/security key assignment of the powerline adapter(s).
Note: If you had previously used the Sync button procedure in generating a random network name/security key. This will display “Unknown Networkname”
Applies changes to Local Device only.
Note: If you choose this option, you will disconnect the Local Device from the Remote Devices.
Applies changes to Local Device and Remote devices.
Note: If you have not entered the DPW for all remote devices, you will receive an error and the changes will not be applied to remote devices without a DPW.