TRENDnet TFM-PCIV92A installation instructions Section System Setup, Uninstall Modem from Windows

TFM-PCIV92A User’s Guide

_________________________________________________________________________________________________________________________

Section 2.3	System Setup
Section 2.3.1	Setup instructions for Windows 98

STEP 1. After you complete the modem hardware installation and turn on your PC, Windows system will automatically detect your new added devices. Windows system will prompt you with an Add New Hardware Wizard.

Then click on Cancel.

STEP 2. Insert the Modem Driver CD-ROM disk attached with your modem into the CD-ROM drive device, Then run <CD-ROM letter>:\drivers\Win98\Setup.exe as shown in figure.

Then click on OK

STEP 3. And then, a prompt screen will ask you to ensure to install the modem driver.

Then click OK.

The setup utility will copy the needed files into windows system.

STEP 4. If there is no error message while the system is installing, your modem has been set up properly and functionally.

- 3 - Rev.1.00.2.1.34

TFM-PCIV92A User’s Guide

_________________________________________________________________________________________________________________________

Section 2.3.2 Uninstall Modem from Windows 98

STEP 1. Open Control Panel window, then click Add/Remove Programs icon.

STEP 2. Choose Agere Systems PCI Soft Modem device in stall/Uninstall tab, then click on Add/Remove… .

STEP 3. Click Yes to ensure to remove Agere Systems PCI Soft Modem device and its drivers.

STEP 4. Click Yes to restart your computer for all of the changes to take effect.

- 4 - Rev.1.00.2.1.34