Transition Networks SSETF10XX-200 specifications Installation, Operation

INSTALLATION

Installing the Cable

FIBER

1.Locate or build 10Base-FL or 100Base-SX compliant fiber cable with male, two-stranded TX to RX connectors installed at both ends.

2.Connect the fiber cables to SSETF10xx-200 Media Converter as described:

•Connect the male TX cable connector the female TX port.

•Connect the male RX cable connector to the female RX port.

3.Connect the fiber cables to the other device (another Media Converter, hub, etc.) as described:

•Connect the male TX cable connector the female RX port.

•Connect the male RX cable connector to the female TX port.

SSETF10xx-200

INSTALLATION -- Continued

Power the Media Converter

1.Install the power adapter cord to the back of the Media Converter.

2.Connect the power adapter plug to AC power.

3.Verify that the Media Converter is powered by observing the illuminated LED power indicator light.

OPERATION

Using Status LEDs

Use the status LEDs to monitor the SSETF10xx-200 Media Converter operation in the network.

Connect the fiber cable to the Media Converter as shown.

RX

TX

Connect the fiber cable to the other device (media converter, hub, etc.) as shown

RX

TX

100	Speed	Dark LED indicates 10 Mb/s operation.
		Slow blinking LED indicates speed is not yet
		selected.
		Fast blinking LED indicates 100 Mb/s.
PWR	Power	Steady LED indicates connection to the external
		AC power.
RXF	Fiber Receive	Flashing LED indicates reception of the data on
		the fiber link.
LKF	Fiber Link	Steady LED indicates fiber link connection.
		Dark LED indicates a lack of power OR a downed
		link.

COPPER

1.Locate or build 10Base-T or 100Base-TX compliant copper cables with male, RJ-45 connectors installed at both ends.

2.Connect the RJ-45 connector at one end of the cable to the RJ-45 port on the SSETF10xx-200 Media Converter.

3.Connect the RJ-45 connector at the other end of the cable to the RJ-45 port on the other device (switch, workstation, etc.).

RJ-45 port		RJ-45 port
on the Media	on the other device
Converter	(switch, work station, etc.)

RXC	Copper Receive		Flashing LED indicates data reception on the
			copper link.
LKC	Copper Link		Steady LED indicates copper link connection.
			Dark LED indicates a lack of power OR a downed
			link.
	SDF			SDC		100
	RXF			RXC		PWR
		10/100-FL/SX			10/100-TX

techsupport@transition.com -- Select the “Transition Now” Link for a Live Web Chat 3 4 Tech Support: 800-260-1312International: 952-941-76007am-6pm CST (GMT-6:00)