John Lewis JLWFF1101 instruction manual The control panel refrigerator, Push button, Switching off

The control panel refrigerator

On /Off

Quick

cool

˚C

Push button

A.Mains indicator light (green)

B.Fridge compartment button ON/OFF

C.Temperature setting button (+) (for warmer temperatures)

D.Temperature display

E.Temperature setting button (-) (for colder temperatures)

F . Quick cool function "on" indicator light (yellow)

G. Quick cool button

When the fridge is first installed

Warning

Allow the appliance to stand for 2 hours after installation.

Insert the plugs into the wall socket.

If the display is OFF press the ON/OFF button.

The green mains indicator light illuminates.

The appliance starts.

Press either the “C“ (+) or “E“ (-) button. The temperature display switches over and the DESIRED temperature currently set flashes on the temperature display.

Set the required temperature by pressing the “C“ (+) or “E“ (-) buttons (see section "Temperature setting buttons"). The temperature display will immediately show the changed setting. Each time a button is pressed the temperature is adjusted by 1 °C.

From a food safety point of view +5 °C should be considered sufficiently cold for storing food in the fridge.

Once the required temperature has been set, after a short period (approx. 5 sec.) the temperature display will change and again indicate the current

ACTUAL temperature inside the fridge. The display will change from flashing to continuous illumination.

Information! When the setting is changed, the compressor does not start immediately if automatic defrosting is currently taking place. As the storage temperature within the fridge is reached quickly you can store food immediately after switching on.

Switching off

The appliance is switched off by holding in button (B) for more than 1 second. After this, a countdown on the temperature display from -3 -2 -1 will be shown.

When the appliance is switched off, the display (D) also goes off.

Temperature setting buttons

The temperature is adjusted using the “C“ (+) and “E“ (-) buttons. These buttons are connected to the temperature display.

The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the display of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons,“C“ (+) or “E“ (-).

Each time one of the two buttons is pressed again the DESIRED temperature is adjusted by 1 °C. The DESIRED temperature must be reached within 24 hours.

If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature.

DESIRED temperature means:

The temperature that has been selected for inside the fridge.The DESIRED temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the current temperature inside the fridge . The ACTUAL temperature is indicated with illuminated numbers.

8