C-8

SUPERSERVER 5014C-T User's Manual
C-2 Installing Windows XP/2000 for Systems with RAIDFunctions

Windows XP/2000: New Installation

1. Insert the Microsoft Windows XP/2000 Setup CD in the CD_ROM drive so
the system can boot from the CD.
2. Press the <F6> key when the message "Press F6 if you need to install a
third party SCSI or RAID driver" is displayed.
3. When the Windows XP/2000 Setup screen appears, press "S" to specify
additional device(s).
4. Insert the "Intel AA RAID XP/2000 Driver for ICH6R" disk into your floppy
drive and press the <Enter> key.
5. Choose Intel(R)82801ER SATA RAID Controller from the list indicated in
the XP/2000 setup screen and press the <Enter> key.
6. Press the <Enter> key to continue the installation process. (If you need to
specify any additional devices to be installed, do it at this time.) Once all
devices are specified, press the <Enter> key to continue with the installa-
tion.
7 . From the Windows XP/2000 Setup screen, press the <Enter> key. Setup
will automatically load all device files and then continue with the installation.
Note: the current version of the ICH6R SATA RAID Utility can only support
Windows XP/2000 Operating Systems.
2. When asked "Are you sure you want to reset all RAID data (Y/N):", type
"Y" to confirm the selection, and press the <Enter> key to return to the main
menu.

Exiting the ICH6R SATA RAID Configuration Utility Program

1. In the main menu, use the <Down> and the <Up> arrow keys to select
"Exit" and then press the <Enter> key.
2. When asked "Are you sure you want to exit? (Y/N):" type "Y" to confirm
the selection and press the <Enter> key to exit the ICH6R SATA RAID Con-
figuration Utility Program. The system will then re-boot.