1-2
SUPERSERVER 5014C-T User's Manual
1-2 Motherboard Features
At the heart of the SuperServer 5014C-T lies the P8SCi, a single processor
motherboard based upon Intel's E7221 chipset. Below are the main fea-
tures of the P8SCi.
Processor
The P8SCi has an LGA775 ZIF socket to support a single Intel® Pentium® 4
("Prescott" type) processor with hyper-threading technology at an 800/533
MHz FSB speed or a single Intel® Celeron® processor at a 533 MHz FSB
speed. Please refer to the support section of our web site for a complete
listing of supported processors (http://www.supermicro.com/support/).
Memory
The P8SCi has four (4) 240-pin DIMM sockets that can support up to 4 GB of
unbuffered ECC type DDR2-533/400 SDRAM modules. The P8SCi's dual-
channel memory bus requires modules to be populated in pairs. All memory
modules must be the same size and speed.
Serial ATA
A Serial ATA controller is incorporated into the ICH6 (South Bridge) portion
of the E7721 chipset to provide a two-port Serial ATA subsystem, which is
RAID 0 and RAID 1 supported. The drives may also be used in a JBOD
configuration. The Serial ATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the
hot-swap capability and RAID function of the Serial ATA drives.
PCI Expansion Slots
The P8SCi has two PCI-Express x1 slots, one 64-bit 133 MHz PCI-X slot and
one 32-bit PCI slot. One riser card is included with the system (see Chapter
5 for details).
Ethernet Ports
Two onboard Broadband BCM5721 Ethernet controllers are integrated into
the P8SCi to support two Gigabit LAN (Ethernet) ports.