Woods Equipment M8200 manual #56038 Cable Control Kit & #46047 Hose Kit For cab tractors only

3

#56038 Cable Control Kit & #46047 Hose Kit (For cab tractors only)

Install Control Valve

(2-Spool #56038 or 3-Spool #56042)

1.Install valve assembly to valve guard, using three 3/8 x 1-1/2 carriage bolts (1), 3/8 lock washers (2), and hex nuts (3).

2.Install valve/guard assembly to right loader mount, using three 3/8 x 1-1/2 carriage bolts (1), 3/8 lock washers (2), and hex nuts (3).

3.For 3-spool valve only: Use two 3/8 x 3/4 car- riage bolts (4) and lock nuts (5) to hold valve guard to mounting shoe.

NOTE: Carriage bolts must be installed so that heads are inside loader mount frame.

1.301104 3/8 NC x 1-1/2 Carriage bolt

2.838 3/8 Lock washer

3.835 3/8 Hex nut

4.24597 3/8 NC x 3/4 Carriage bolt (for 3-spool valve only)

5.14350 3/8 NC Flange lock nut

(for 3-spool valve only)

6.56250 2-spool valve

or

6.56270 3-spool valve

7.46045 Valve guard

1

4

2

3

5

CD5817 6 7

Figure 23 Valve Guard Assembly

PN-46018 (Rev. 3/15/02)

Hydraulic Installation 21