CONTROLVALVE & HOSE KIT INSTALLATION
■Keep hands and body away from pressurized lines. Use paper or cardboard, not hands or other body parts to check for leaks. Wear safety goggles. Hydraulic fluid under pressure can easily penetrate skin and will cause serious injury or death.
■Make sure that all operating and service per- sonnel know that if hydraulic fluid penetrates skin, it must be surgically removed as soon as possible by a doctor familiar with this form of injury or gan- grene, serious injury, or death will result. CON-
TACT A PHYSICIAN IMMEDIATELY IF FLUID ENTERS SKIN OR EYES. DO NOT DELAY.
■Air in hydraulic systems can cause erratic operation and allow loads or equipment compo- nents to drop unexpectedly. When connecting equipment or hoses or performing any hydraulic maintenance, purge any air in hydraulic system by operating all hydraulic functions several times. Do this before operating or allowing anyone to approach the equipment.
■Make sure all hydraulic hoses, fittings, and valves are in good condition and not leaking before starting power unit or using equipment. Check and route hoses carefully to prevent damage. Hoses must not be twisted, bent sharply, kinked, frayed, pinched, or come into contact with any moving parts. Operate moveable components through full operational range to check clearances. Replace any damaged hoses immediately.
■Protective hose sleeves must cover all hydrau- lic hoses and be secured onto metal hose fittings. Replace hoses or sleeves if damaged or if protec- tive sleeve cannot be properly positioned or secured.
IMPORTANT
■Hydraulic valves must be connected to the tractor hydraulic system as shown in this loader mounting kit manual.
■If hydraulic lines are not connected as shown in the mounting kit manual, the loader control valve may be damaged. A blocked outlet (Return) or improper hose connection will cause pressurized oil to enter the return circuit and damage the valve.
COMPLETION OF THIS INSTALLATION REQUIRES CONNECTION TO THE LOADER, ASSEMBLED ACCORDING TO INSTRUCTIONS IN MANUAL #56060.
SHUT OFF ENGINE AND LOCK PARKING BRAKE BEFORE INSTALLING HOSE KITS. CHECK ALL PARTS IN HOSE KIT AGAINST PACKING LIST.
THE FOLLOWING INSTRUCTIONS ARE FOR OPERATING THE LOADER USING THE TRACTOR HYDRAULIC REMOTE CONTROL LEVERS:
1
2
3
#40542 Hose Kit
(For use with tractor remotes) . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 12
#56037 Control Valve Kit & #40547 Hose Kit
(For use with loader joystick) . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 15
#56038 Cable Control Valve Kit & #46047 Hose Kit (For use
on cab tractors with
