2
#56037 Valve Kit & #40547 Hose Kit Cont’d
Install Hose Retainer & Line Support Bracket
1.Remove the cap screws that hold the tractor fender to the operator platform and install the hose retainer.
2.Position the hose retainer to keep the hoses from touching the tractor tire as shown in Figure 20. To attach the hose retainer, use new cap screw (14), lock washer (15), and flat washer (tractor part) as shown in Figure 19 and Figure 20.
3.Refer to Figure 18. Install the line support bracket as shown by removing nuts from right side of cross- member then
4.Attach the line clamp (11) and secure the line, using cap screw (13) and nut (12).
12
TRACTOR
PART |
| 11 |
|
14
15
|
|
|
Figure 20 Hose Retainer Installed
9. | 58859 | Hose retainer |
10. | 40546 | Line support bracket |
11. | 480261 | Clamp |
9
10
13
12. | 6128 | 1/4 Lock nut |
13. | 300057 | 1/4 x 3/4 Cap screw |
14. | 307129 | M8 x 1.25 x 30mm Cap screw |
15. | 2472 | 5/16 Lock washer |
16. | Tractor part |
Figure 19 Hose Retainer & Line Support Bracket
Connect Feedline Hoses
1.Connect 54” hoses from hose kit to valve work ports A, B, C, and D as shown in Figure 21.
2.Identify the appropriate feedline locations and connect opposite end of each hose to loader feedlines as shown in Figure 21.
|
|
|
| $ | %8&.(7 &</ %$6( (1' | |
,1 | ' | % |
|
| '803 5(' | |
| % | %8&.(7 &</ 52' (1' | ||||
|
| |||||
|
|
|
|
| 52//%$&. %/8( | |
|
|
|
| & | %220 &</ 52' (1' | |
| & | $ |
|
| '2:1 <(//2: | |
287 | 3%< | ' | %220 &</ %$6( (1' | |||
|
| |||||
|
|
|
| 83 *5((1 | ||
|
|
|
|
|
%$
5+ /2$'(5 %220
'&
/2$'(5 )(('/,1(6
Figure 21 #56037 Control Valve & Loader Feedline Connections
Hydraulic Installation 19