32

#56038 Valve Kit & #46047 Hose Kit Cont’d

Verification of Control Movements

1.Refer to the Woods Loader Operator’s Manual to complete the loader installation. At least 6” spacing should be maintained between valve, bracket, or hoses and any tractor control (brake pedals, accelera- tor, hand throttle, or hydraulic levers).

2.Comply with all Safety Rules and start the tractor.

3.Check that all hydraulic control lever positions operate the loader movements correctly as shown in Figure 35.

NOTE: When the optional auxiliary hydraulic control is used for operating an attachment such as a grap- ple, pushing the control lever forward should close the attachment and pulling the lever rearward should open the attachment. See Figure 36.

4.If loader movements do not respond correctly, shut off tractor, relieve pressure, and reconnect prop- erly. Loader control movements must be correct before proceeding.

5.Once all hoses are connected correctly, start the tractor and operate the loader to check for leaks. Purge any remaining air from the hydraulic system.

6.When hose routings and correct loader opera- tions are verified, identify each circuit by placing a matching colored band around the male and female quick-disconnect coupler set. The colored bands will make re-installation easier when the loader is remove from the tractor.

7.Attach the plastic tie straps (included in kit) every

20inches around the hoses to keep them tightly bun- dled and away from contact with the ground or other moving parts on the tractor or loader.

8.Be sure the adequate slack is left in the hoses so they can move as the loader moves through its full range of motion.

9.Before operating the loader, make sure that the Pre-Delivery, Delivery, and Pre-Operation Checklists from the Operator section in the Loader Operator’s Manual have been completed.

)/2$7 326,7,21 ￿￿/(9(5 &21752/

75$&725

/2:(5

'803

 

 

)5217

 

 

52//%$&. /,)7

Figure 35 Single Lever Control Operation

Handle Forward - Boom down

Handle forward to limit - Float position

Handle back - Boom up

Handle to right - Dump bucket or attachment

Handle to left - Rollback bucket or attachment

&/26(

23(1

-+DQGOH IRUZDUG ￿￿ &ORVH JUDSSOH

-+DQGOH UHDUZDUG ￿￿ 2SHQ JUDSSOH

Figure 36 Auxiliary Control Operation

PN-46018 (Rev. 3/15/02)

Hydraulic Installation 29

Page 31
Image 31
Woods Equipment M8200 manual 231

M8200 specifications

Woods Equipment M8200 is a versatile and robust piece of machinery designed for a variety of agricultural and landscaping tasks. Known for its durability and performance, the M8200 offers users a range of advanced features and technologies that enhance its efficiency and ease of use.

One of the standout characteristics of the M8200 is its powerful engine. It is equipped with a high-performance engine that delivers impressive horsepower, ensuring it can handle demanding tasks such as mowing, tilling, and snow removal with ease. The engine's engineering not only provides power but also emphasizes fuel efficiency, which is crucial in reducing operational costs.

The M8200 is designed with user comfort in mind. It features an ergonomic operator station that allows for easy access to controls, reducing operator fatigue during long hours of use. The spacious cabin provides good visibility, allowing operators to maintain awareness of their surroundings while working. Additionally, the superior suspension system absorbs shocks and vibrations, ensuring a smoother ride over uneven terrains.

Technology plays a vital role in the M8200's performance. The machine is equipped with cutting-edge precision agriculture technology that allows for optimal field mapping and efficient resource management. This technology helps farmers and landscapers achieve maximum productivity by ensuring that every inch of land is utilized effectively.

Another significant feature of the Woods Equipment M8200 is its attachment compatibility. The M8200 can easily accommodate a wide range of attachments, including rotary cutters, plows, and box blades, making it multifunctional. This adaptability is beneficial for users who need to perform different tasks throughout the year, as it saves costs and space.

The safety features of the M8200 are also commendable. It comes with a roll-over protective structure (ROPS), seatbelts, and strategically placed controls that minimize the risk of accidents. Enhanced lighting systems improve visibility during nighttime operations, ensuring that users can work safely around the clock.

In summary, the Woods Equipment M8200 is a powerful and versatile machine, perfect for agricultural and landscaping tasks. Its strong engine, operator-friendly design, advanced technology, attachment compatibility, and robust safety features make it a valuable asset for any operator focused on efficiency and performance. This tractor continues to be a preferred choice among professionals looking for reliability and innovation in their equipment.