LOADER MOUNT INSTALLATION Cont’d
Install Front Mount Bracket
1.Install front mount bracket (3) to tractor steering housing, using cap screws (17) and hardened flat washers (11) as shown in Figure 6.
3
3. 1002896 Front mount bracket
11. 57817 5/8 Hardened flat washer
17. 307425 M16 x 1.5 x 35mm Cap screw
17
11
Figure 6 Front Mount Bracket
Install Side Rails
1.Install #59628 right side rail and #59631 left side rail to outside of rear mounts as shown in Figure 7. Secure with cap screws (13), hardened flat washers (11), and hex nuts (12).
2.Secure at front support with cap screws (13), flat washers (11), and hex nuts (12). Flat washers are installed over the slot as shown below.
11.57817 5/8 Hardened flat washer
12.230 5/8 Hex nut
13.4548 5/8 NC x
13
11
12
13 11
12
/()7 /2$'(5 02817
Figure 7 Side Rails Installed to Rear Mounts
& Front Support
Mount Installation 9