FORM
EXECUTION
Installation
General: Installing contractor shall install rooftop unit(s), including components and controls required for opera- tion, in accordance with rooftop unit manufacturer’s writ- ten instructions and recommendations. Rooftop units shall be installed as specified.
1.Unit(s) specified shall include a protective covering membrane for such equipment being shipped by truck, rail, or ship. The membrane is fully formed around the equipment exterior. The membrane cov- ers the entire top, side and end panel surface as to protect the product effectively during shipping & storage including “Long Term Storage”. Storing on jobsite shall no longer require the unit(s) to be cov- ered with a tarp as long as the covering membrane has not been removed.
2.All size or shape equipment including electrical components, especially those not built with weath- erproof enclosures,
3.Manufacturers of units not having a protective mem- brane, fully formed around the equipment exterior, covering the entire top, side and end panel surface area shall be required to ship equipment covered with a tarp, in crating or in a closed truck as is nec- essary to ensure product protection from road salt/ chemicals damage, moisture and dirt infiltration. Arrangements for long term storage at the job site shall be required.
Location: Locate the rooftop unit as indicated on draw- ings, including cleaning and service maintenance clear- ance per Manufacturer instructions. Adjust and level the rooftop unit on support structure.
INSPECTION AND START-UP SUPERVISION
A
JOHNSON CONTROLS | 43 |
