LOADER MOUNT INSTALLATION
■Only use 111868 Loader Mounting Kit for mount- ing Woods 1020/1027 loaders to Kubota M8200 and M9000 tractors. Any other use or modification of this kit may result in serious injury or death.
Safety instructions are important! Read all attachment and power unit manuals; follow all safety rules and safety decal information. (Replace- ment manuals are available from dealer or, in the United States and Canada, call
CAUTION
If you do not understand any part of this manual and need assistance, see your dealer.
Always wear relatively tight and belted clothing to avoid entanglement in moving parts. Wear sturdy,
Do not modify or alter or permit anyone else to modify or alter the equipment or any of its compo- nents in any way.
IMPORTANT
■A front wheel track setting of 60.6” is the widest setting allowed by the tractor manufacturer for 2WD models using front end loaders.
TRACTOR PREPARATION
For installing this mounting kit, references to right, left, forward, and rearward directions are determined from the operator’s position in the tractor seat.
1.Shut off engine and set parking brake during installation.
2.Remove the tractor front weights and front weight bracket if equipped. Remove tool box on tractors with cab.
3.Cab tractors only – Remove four bolts (Figure 1) for cab tractor mountings.
IMPORTANT
■Clean threaded holes in the tractor chassis thoroughly, using a tap of the proper size. Paint, rust, or debris in the threads may not permit cap screws to be installed and tightened correctly.
Figure 1 Remove 4 bolts on each side
