EN-21
ENGLISH
Menu operation (continued)
2.INSTALLATION menu

• By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected,

and you cannot switch the LAMP MODE in about one minute after the lamp is on.

• In AUDIO INPUT, HDMI audio is selected when the Input Source is HDMI input. The audio of AUDIO 1, AUDIO 2, AUDIO 3, and MIX cannot

be selected.

Menu option Setting Feature description
INSTALLATION ADVANCED menu
WALL SCREE N
OFF/BEIGE / LIGHT
BLUE / LIGHT GREEN
/ PINK /BLACK
BOARD/WHITE BOARD
Selects a desired setting based on the color of the screen or wall
on which images are projected. (See page 16.) When selecting a
setting other than BLACK BOARD/WHITE BOARD, you can fine-
tune the color tone to the desired level on the 1 to 5 scale.
LAMP MODE
STANDARD Select this setting when you want to view images in a well-lit
room.
LOW
Select this setting when you want to view images at a moderate
light intensity. The operating sound is consequently reduced, and
the lamp lifetime becomes longer.
• When this mode is switched, projected images may flicker.
• If this mode is frequently switched, the lamp may be deterio-
rated.
STANDBY MODE
STANDARD LAN can be activated in STANDARD MODE.
LOW Power consumption can be lowered when selecting LOW. How-
ever, LAN and MONITOR OUT cannot be activated.
AUDIO INPUT
AUTO
If AUTO is selected, selects AUDIO 1 when the input source is
COMPUTER 1, selects AUDIO 2 when the input source is COM-
PUTER 2, selects AUDIO 3 when the input source is VIDEO/S-
VIDEO, selects HDMI when the input source is HDMI.
AUDIO 1/AUDIO 2/AUDIO 3 Select the audio input.
MIX Selects MIX signal of AUDIO 1 and AUDIO 2. You can change the
balance of AUDIO 1/AUDIO 2 using MIX .
AUTO KEYSTONE ON/OFF Select Auto Keystone function.
IMAGE REVERSE
OFF Select this setting when you want to view images from the front
with the projector set on the floor.
MIRROR Select this setting when you want to view images from behind the
screen with the projector set on the floor.
INVERT Select this setting when you want to view images from behind the
screen with the projector set at the ceiling.
MIRROR INVERT Select this setting when you want to view images from the front
with the projector set at the ceiling.
ADVANCED MENU OK
AUTO POWER ON ON/OFF
When this mode is set to ON, the lamp is automatically lit when
the power cord is plugged in the wall outlet. Select ON when you
set the projector at the ceiling.
• When the lamp is off, the projector is in standby. Use the
remote control to turn on the lamp.
AUTO POWER OFF OFF/5-60 min Selects a desired timer setting until the projector enters the
standby mode when there is no signal input from the source.
IMAGE CAPTURE GO Use to capture the screen for the splash screen. (See page 30.)
SPLASH SCREEN ON/OFF Select ON to display the splash screen when the projector is pow-
ered on.
BACK COLOR BLUE/BLACK/IMAGE Selects the background color that is displayed when there is no
signal input from the source.
AV MUTE MODE BLACK/IMAGE
Use to choose the background, either BLACK, or IMAGE, which
will be displayed when the AV MUTE button is pressed. When
IMAGE is chosen, the splash screen will be displayed.
LAMP TIME RESET OK Resets LAMP TIME.
LAMP MODE
OFF
AUTO KEYSTONE
OFF
IMAGE
REVERSE
WALL SCREEN BEIGE
STANDBY MODE STANDARD
STANDARD
AUDIO INPUT AUTO
opt.
INSTALLATION
OK
ADVANCED MENU
opt.
INSTALLATION
ADVANCED MENU
AUTO POWER
OFF OFF
OFF
AUTO POWER
ON
IMAGE CAPTURE
ON
SPLASH
SCREEN ON
BACK COLOR BLUE
AV MUTE MODE BLACK
LAMP TIME
RESET OK
GO