EN-23
ENGLISH
Menu operation (continued)
4.SINGAL menu

• Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction.

• When you change the value of the horizontal or vertical position drastically, noise may appear.

• The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary even when the value

is changed. These conditions are not a malfunction.

• SHUTTER does not work correctly during keystone adjustment.

• When you increase the value of OVER SCAN, noise may appear on the screen.

Important:

• You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is input.

5.NETWORK menu
Menu option Setting Feature description
SIGNAL USER menu
HORIZ. POSITION 0-999 Select this setting to adjust the horizontal position of projected images.
VERT. POSITION 0-999 Select this setting to adjust the vertical position of projected images.
FINE SYNC. 0-31 Select this setting to eliminate flickering or blurs, if they appear, when
you are viewing projected images.
TRACKING 0-2800 Select this setting to eliminate vertical wide stripes, if they appear, when
you are viewing projected images.
COMPUTER INPUT
AUTO Automatically sets the appropriate setting.
RGB Select this setting when you connect the projector to high definition
video equipment having R, G, and B output terminals.
YCBCR/YPBPR
Select this setting when you connect the projector to a DVD player or
other device having Y, CB, and CR (or Y, PB, and PR) component video
output terminals.
OVER SCAN 100%-90% Use this setting to adjust the display area of projected images.
HOLD OFF / ON Use this setting to adjust projected images when flagging occurs in the
upper area of the screen.
USER OK
CLAMP POSITION 1-255 Use this setting to correct solid white or solid black that appears in pro-
jected images.
CLAMP WIDTH 1-63 Use this setting to correct solid black that appears in projected images.
VERT.SYNC AUTO / OFF Use this setting to adjust projected images when the motion is not
smooth. Select AUTO for most cases.
LPF ON / OFF Select this setting to enable or disable LPF.
SHUTTER(U) 0-20 Use this setting to adjust projected images when noise appears in the
top part of the image.
SHUTTER(L) 0-20 Use this setting to adjust projected images when noise appears in the
bottom part of the image.
SHUTTER(LS) 0-20 Use this setting to adjust projected images when noise appears in the
left half of the image.
SHUTTER(RS) 0-20 Use this setting to adjust projected images when noise appears in the
right half of the image.
Menu option Setting Feature description
NETWORK IP CONFIG menu
PROJECTOR NAME
*****... Displays PROJECTOR NAME. Displays PROJECTOR NAME in
blank when PROJECTOR NAME is not set.
SET Set PROJECTOR NAME. Enter up to 15 characters (alphabets or
numeric characters).
NETWORK PASSWORD OK Set the password for Web control or PJLink certification.
IP CONFIG OK Select this setting for IP Configuration.
DHCP ON / OFF Use this setting when you obtain IP CONFIG automatically by
DHCP server.
IP ADDRESS
***,***,***,*** Displays IP ADDRESS. However, IP ADDRESS is not set as factory
default, and cannot be displayed.
SET Set IP ADDRESS. When DHCP is set to ON, you cannot change
this setting.
SUBNET MASK
***,***,***,*** Displays SUBNET MASK. However, SUBNET MASK is not set as
factory default, and cannot be displayed.
SET Set SUBNET MASK. When DHCP is set to ON, you cannot change
this setting.
DEFAULT GATEWAY
***,***,***,*** Displays DEFAULT GATEWAY. However, DEFAULT GATEWAY is
not set as factory default, and cannot be displayed.
SET Set DEFAULT GATEWAY. When DHCP is set to ON, you cannot
change this setting.
MAC ADDRESS xx-xx-xx-xx-xx-xx Displays MAC ADDRESS.
PJLink CERTIFICATION ON / OFF Use this setting for PJLink Certification.
NETWORK RESET OK Resets the Network Setting.
USER OK
OFF
HOLD
100%
OVER SCAN
SIGNAL
R G B
R G B
HORIZ. POSITION 0
VERT. POSITION 0
TRACKING 0
COMPUTER
INPUT RGB
FINE SYNC. 0
opt.
SIGNAL
USER
CLAMP
POSITION 1
CLAMP WIDTH 1
LPF OFF
SHUTTER(U)
VERT. SYNC. AUTO
0
?
SHUTTER(L) 0
SHUTTER(LS) 0
SHUTTER(RS) 0
opt.
opt.
NETWORK
PROJECTOR
NAME
NETWORK
PASSWORD
PJLink
CERTIFICATION
OK
SET
NETWORK RESET OK
IP CONFIG OK
ON
opt.
NETWORK
IP CONFIG
DHCP
IP ADDRESS
DEFAULT
GATEWAY
MAC ADDRESS
SUBNET MASK
xx-xx-xx-xx-xx-xx
192.168.0.10
255.255.255.0
10.132.1.1
ON