SURFACE COOKWARE TIPS

(continued)

How to Check Pan Performance

Use of correct cookware can affect the cooking performance and cleaning of your cooktop. The correct cookware reduces the temperature of the cooktop surface and minimizes the chance of spillovers burning onto the cooktop.

You must use pans with perfectly flat bottoms. Some pans may have curved or rounded bottoms or may be warped. If you are unsure of the flatness of your pans you may do this quick test.

Turn your pan upside

down on the countertop,

place a ruler flat against the pan surface. The

bottom of the pan and the straight edge of the ruler

should fit flush against each other all the way across. Turn the ruler a full 360 degrees, checking for any space between the ruler and the bottom of the pan.

Pans with rounded, curved, ridged or warped bottoms are not recommended.

Another simple test to determine even heat distribution across the cookware bottom is to put one inch of water in the pan. Bring the water to a boil and observe the location of bubbles as the water starts to boil. Good flat cookware will have an even distribution of bubbles over the bottom surface area of the pan. Bubbles localized in only a portion of the bottom indicate uneven contact of the pan to the surface unit, uneven heat transfer or an unsuitable pan.

Use pans that match the diameter of the surface unit. Cooking performance will not be as good if the cookware is either smaller or larger than the surface unit.

SPECIAL CAUTIONS FOR GLASS COOKTOPS

SURFACE COOKING

OFF CENTER

•Never cook directly on the glass. Always use cookware.

•Always place the pan in the center of the surface unit you are cooking on.

DRAGGING

DROPPING

•Do not slide cookware across the cooktop because

it can scratch the glass— the glass is scratch resistant, not scratch proof.

•Don’t store heavy items above the cooktop. If they drop onto the cooktop, they can cause damage

 

• Do not use the surface as a

CUTTING

cutting board.

12

Page 11 Page 13
Page 12
Image 12
GE 49-8723, 4164D2966P234 warranty How to Check Pan Performance, Special Cautions for Glass Cooktops
Page 11 Page 13

4164D2966P234, 49-8723 specifications

The GE 49-8723,4164D2966P234 is a cutting-edge component designed to meet the demands of modern industrial applications. This part, part of General Electric's extensive lineup, is engineered with advanced technologies and high-performance characteristics that make it a preferred choice in various sectors including manufacturing, energy, and automation.

One of the standout features of the GE 49-8723 is its enhanced reliability. Built with robust materials and sophisticated engineering processes, this component is designed to withstand harsh operating conditions, ensuring minimal downtime and maintenance costs. This reliability is crucial for industries that rely on continuous operation and efficiency.

The technology behind the GE 49-8723 incorporates intelligent sensors that provide real-time data monitoring. These sensors contribute to improved operational visibility, enabling proactive management of systems. By integrating data analytics capabilities, users can track performance metrics and optimize usage, leading to increased productivity and reduced energy consumption.

Another significant aspect of the GE 49-8723 is its compatibility with various control systems. It supports multiple communication protocols, which allows seamless integration into existing infrastructures. This flexibility is essential for manufacturers looking to upgrade their systems without incurring substantial costs or complexities associated with retrofitting.

In addition to its compatibility, the GE 49-8723 offers advanced safety features to protect both the equipment and personnel. It includes built-in fail-safes and redundancy measures that ensure consistent operation even in the event of component failure. This emphasis on safety not only protects investments but also enhances overall workplace safety.

The compact design of the GE 49-8723 also deserves mention. Its smaller footprint allows for easier installation and greater versatility in application, making it suitable for environments with limited space. Despite its size, it does not compromise functionality and performance, making it an ideal choice for various applications.

Overall, the GE 49-8723,4164D2966P234 showcases a balanced combination of reliability, advanced technology, safety, and adaptability. Its innovative design and integration capabilities provide industries with the tools needed to enhance operational efficiency and sustainability, making it a valuable asset in the ever-evolving landscape of industrial applications.
Top Page Image Contents