GE 49-8723 Oven Control, Clock And Timer, Automatic Clock, To Set the Clock, To Set the Timer

Models: 4164D2966P234 49-8723

1 44
Download 44 pages 27.07 Kb
Page 16
Image 16
OVEN CONTROL, CLOCK AND TIMER

OVEN CONTROL, CLOCK AND TIMER

Automatic Clock

The clock must be set for the automatic oven timing functions to work properly. The time of day cannot be changed during a Timed Baking or Self-Cleaning cycle.

To Set the Clock

1.Press the CLOCK pad.

CLOCK 2. Press the HOUR and MIN. pads to set the Automatic Clock time of day.

Timer

The timer is a minute timer only.

The timer does not control oven operations. The maximum setting on the timer is 11 hours and 59 minutes.

To Set the Timer

TIMER

1. Press the TIMER

ON/OFF pad.

ON/OFF

 

2.Press the HOUR and MIN. pads until the amount of time you want shows in the display. The timer will start automatically within a few seconds of releasing the pad.

To Reset the Timer

If the display is still showing the time remaining, you may change it by pressing the HOUR and MIN. pads until the time you want appears in the display.

If the remaining time is not in the display, recall the remaining time by pressing the TIMER ON/OFF pad and then pressing the HOUR and MIN. pads until the new time you want shows on the display.

To Cancel the Timer

End of Cycle Tones (on some models)

To cancel the timer, the remaining time must be in the display. To recall the time remaining, press the TIMER ON/OFF pad once. To cancel the timer press the TIMER ON/OFF pad again.

The end of cycle tone can be cleared by pressing the TIMER ON/OFF pad or, on some models, by pressing the COOK TIME ON/OFF pad depending on which function you are using.

Power Outage

Oven Temperature Knob

On some models, after a power outage the oven will automatically resume its setting once the power is restored.

For models with a CLOCK pad, when the power is restored the display will flash “PF” for Power Failure until a pad is pressed or the knob is turned. Reset the clock to the correct time of day.

If the oven was in operation when the power outage occurred, the Oven Temperature knob must be turned back to OFF. Then reset the knob to the way it was

The oven temperature knob maintains the temperature you set from WARM (170°F.) to BROIL (550°F.). It also has an OFF and an AUTO SELF CLEAN setting.

OVEN ON

 

OFF

 

 

 

WM

 

BROIL

 

 

 

 

 

 

 

 

200

LATCH

AUTO

 

 

250

SELF

 

 

DOOR

 

 

 

CLEAN

 

 

300

 

 

 

 

PREHEATED

550

 

350

500

 

400

 

 

450

 

 

 

 

Appearance may vary.

before the power outage.

If your model has a COOK TIME ON/OFF pad and your oven was set for timed baking or roasting when the power outage occurred, the clock and all programmed functions must be reset. To reset them, first turn the Oven Temperature knob back to OFF, reset the clock, functions and knob back to the way they were before the power outage.

The PREHEATED light glows when the oven reaches your selected temperature.

The OVEN ON light will glow any time the Oven Temperature knob is not in the OFF position and is set on a temperature or a function.

16

Page 16
Image 16
GE 49-8723 warranty Oven Control, Clock And Timer, Automatic Clock, To Set the Clock, To Set the Timer, To Reset the Timer