IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before using this appliance.

IMPORTANT SAFETY NOTICE

•The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of substances known to the state to cause birth defects or other reproductive harm, and requires businesses to warn customers of potential exposure to such substances.

•The fiberglass insulation in self-clean ovens gives off a very small amount of carbon monoxide during the cleaning cycle. Exposure can be minimized by venting with an open window or using a ventilation fan or hood.

•Fluorescent light bulbs contain mercury. If your model has a surface light, you must recycle the fluorescent light bulb according to local, state and federal codes.

When using electrical appliances, basic safety precautions should be followed, including the following:

•Use this appliance only for its intended use as described in this guide.

•Be sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided installation instructions.

•Do not attempt to repair or replace any part of your range unless it is specifically recommended in this guide. All other servicing should be referred to a qualified technician.

•Before performing any service, DISCONNECT THE RANGE POWER SUPPLY AT THE HOUSEHOLD DISTRIBUTION PANEL BY REMOVING THE FUSE OR SWITCHING OFF THE CIRCUIT BREAKER.

•Do not leave children alone—children should not be left alone or unattended in an area where an appliance is in use. They should never be allowed to sit or stand on any part of the appliance.

•Do not allow anyone to climb, stand or hang on the door, kick panel or storage drawer or cooktop. They could damage the range and even tip it over, causing severe personal injury.

WARNING—

All ranges can tip and injury could result. To prevent accidental tipping of the range, attach it to the wall and floor by installing the Anti-Tip device supplied.

To check if the device is installed and engaged properly, remove the kick

panel or storage drawer and inspect the rear leveling leg. Make sure it fits securely into the slot.

If you pull the range out from the wall for any reason, make sure the device is properly engaged when you push the range back against the wall. If it is not, there is a possible risk of the range tipping over and causing injury if you or a child stand, sit or lean on an open door.

Please refer to the Anti-Tip device information in this guide. Failure to take this precaution could result in tipping of the range and injury.

•CAUTION: ITEMS OF INTEREST TO CHILDREN SHOULD NOT BE STORED IN CABINETS ABOVE A RANGE OR ON THE BACKSPLASH OF A RANGE—CHILDREN CLIMBING ON THE RANGE TO REACH ITEMS COULD BE SERIOUSLY INJURED.

•Never wear loose-fitting or hanging garments while using the appliance. Be careful when reaching for items stored over the range. Flammable material could be ignited if brought in contact with hot surface units or heating elements and may cause severe burns.

• Use only dry pot holders—moist or

damp pot holders on hot surfaces may result in burns from steam. Do not let

pot holders touch hot surface units or heating elements. Do not use a towel or other bulky cloth.

•For your safety, never use your appliance for warming or heating the room.

•DO NOT STORE OR USE COMBUSTIBLE MATERIALS, GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE.

(continued next page)

Important Safety Instructions

•Do not store flammable materials in an oven or near the cooktop.

3

Page 2 Page 4
Page 3
Image 3
GE 4164D2966P234, 49-8723 warranty Important Safety Instructions
Page 2 Page 4

4164D2966P234, 49-8723 specifications

The GE 49-8723,4164D2966P234 is a cutting-edge component designed to meet the demands of modern industrial applications. This part, part of General Electric's extensive lineup, is engineered with advanced technologies and high-performance characteristics that make it a preferred choice in various sectors including manufacturing, energy, and automation.

One of the standout features of the GE 49-8723 is its enhanced reliability. Built with robust materials and sophisticated engineering processes, this component is designed to withstand harsh operating conditions, ensuring minimal downtime and maintenance costs. This reliability is crucial for industries that rely on continuous operation and efficiency.

The technology behind the GE 49-8723 incorporates intelligent sensors that provide real-time data monitoring. These sensors contribute to improved operational visibility, enabling proactive management of systems. By integrating data analytics capabilities, users can track performance metrics and optimize usage, leading to increased productivity and reduced energy consumption.

Another significant aspect of the GE 49-8723 is its compatibility with various control systems. It supports multiple communication protocols, which allows seamless integration into existing infrastructures. This flexibility is essential for manufacturers looking to upgrade their systems without incurring substantial costs or complexities associated with retrofitting.

In addition to its compatibility, the GE 49-8723 offers advanced safety features to protect both the equipment and personnel. It includes built-in fail-safes and redundancy measures that ensure consistent operation even in the event of component failure. This emphasis on safety not only protects investments but also enhances overall workplace safety.

The compact design of the GE 49-8723 also deserves mention. Its smaller footprint allows for easier installation and greater versatility in application, making it suitable for environments with limited space. Despite its size, it does not compromise functionality and performance, making it an ideal choice for various applications.

Overall, the GE 49-8723,4164D2966P234 showcases a balanced combination of reliability, advanced technology, safety, and adaptability. Its innovative design and integration capabilities provide industries with the tools needed to enhance operational efficiency and sustainability, making it a valuable asset in the ever-evolving landscape of industrial applications.
Top Page Image Contents