
Installing the Brother Software (For Parallel Interface)
IMPORTANT
To install the software using Windows NT® Workstation Version 4.0, you must be logged on as the Administrator. After
Overview of Basic Steps
1.Insert the Brother
2.Enter the command for your version of Windows® , if needed.
3.Select the software option that suits your needs.
4.Follow the installation instructions.
1Insert the Brother
2Enter the command for your version of Windows® , if needed.
After you insert the Brother
■If you are using Windows® 3.1x, from the Program Manager: Click File, then Run, then type x:SETUP.EXE. (“ x” is the drive letter for your
■If you are using Windows® 95/98 or Windows NT® Workstation Version 4.0, the Software Installation program appears automatically when you insert the Brother
■For Windows® 95/98 and Windows NT® Workstation Version 4.0, you can also click Start at the Desktop, select Run and then enter x:\SETUP.EXE. (“ x” is the drive letter for your
The Brother LOGO will be displayed on the screen.
12 - 12 S E T U P B R O T H E R M A C H I N E W I T H P C