Faxing from the Scanner Glass

You can use the scanner glass to fax one page at a time or pages of a book. Originals can be letter or A4 size (8.5 inches to 11.7 inches).

To use the scanner glass, the ADF must be empty.

Originals are Face Down on the Scanner Glass

1Lift the document cover.

2Using the document guidelines on the left, center the original face down on the scanner glass.

3Close the document cover.

If the original is a book or is thick, do not slam the cover or press on it.

4Dial the fax number, then press Start . The MFC starts scanning the first page.

5To send a single page, go to Step 7— OR— To send multiple pages, go to

Step 6.

MEMORY #01 100%

SET:NEXT PAGE￿ START:TO DIAL

6Place the next page on the scanner

glass and press Set . The MFC starts scanning. (Repeat Step 6 for each additional page.)

7Press Start to begin dialing.

Press Stop to cancel. If the origianl was scanned into memory, press 1 to CLEAR it— OR2 to EXIT.

If memory is full, and you are faxing a single page, it will be sent in real time.

You cannot fax from the scanner glass when the MFC is sending, receiving or printing a fax.

S E T U P S E N D

6 - 3

Page 61
Image 61
Brother MFC 9600 owner manual Faxing from the Scanner Glass, Setnext page Startto Dial