Real Time Transmission

When you have a MEMORY FULL message, the MFC cannot continue scanning pages into memory before sending. However, you can turn on

REALTIME TX.

1Insert the original in the feeder or on the scanner glass.

2 Press Function , 1 , 3 , 8 .

8. REAL TIME TX

3To change the default setting, press or to select ON (or OFF) and press Set . Go to Step 5—OR—For

the next fax transmission only,

press or to select NEXT FAX ONLY and press Set .

REAL TIME:ON?￿ SELECT <- -> & SET

4For the next fax only, press or to select ON (or OFF) and press Set .

5Press 1 if you want to select additional settings. The display returns to the SETUP SEND menu—OR—Press 2 if you are finished choosing settings and go to Step 6.

6Enter fax number and press Start .

Checking the Jobs Status

Check memory for unsent jobs. (If no memory is clear, the screen displays NO JOB WAITING.) (See Canceling Jobs in Memory, page 6-7.)

1If the machine is idle, press Function , 1 , 4 .

—OR—

If the MFC is busy, press Stop .

2If you have multiple jobs waiting, use or to scroll through the list.

3Press Stop to exit.

6 - 6 S E T U P S E N D

Page 64
Image 64
Brother MFC 9600 Real Time Transmission, Checking the Jobs Status, Realtime TX, Real Time TX, Real TIMEON? Select - & SET