Brother MFC 9600 owner manual Manual Transmission, Manual and Automatic Fax Redial, Dual Access

Manual Transmission

Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the fax.

1Insert the original in the ADF or on the scanner glass.

2Press Hook for a dial tone.

3Enter the fax number you want to call (you can enter the digits using the dial pad, or you can enter a One Touch or Speed Dial number or you can call from the Tel-index). (See Auto Dial Numbers and Dialing Options, page 7-1.)

4When you hear the fax tone, press Start — OR—If you are using the scanner glass, go to step 5.

5 Press 1 to begin sending.	1.SEND 2.RECEIVE￿
	￿

Manual and Automatic Fax Redial

If you’re sending a fax manually and the line is busy, press Redial/Pause to retry the number.

If you’re sending a fax automatically and the line is busy, the MFC will automatically redial up to three times at 5 minute intervals.

Dual Access

If the ADF is empty, you can place an original in the ADF and set temporary settings, dial a number, and begin scanning the fax into memory— even when the MFC is receiving a fax, sending a fax, or printing a fax from memory. The screen displays the new job number and available memory.

You cannot use fax from the scanner glass when the MFC is sending, receiving or printing a fax.

If you get a MEMORY FULL message while scanning the first page of a fax press Stop to cancel the scan. If you get a MEMORY FULL message while scanning in a subsequent page, you’ll have the option to press Start to transmit the pages scanned so far, or to press Stop to cancel the operation.

The number of pages you can scan into memory varies with the data they contain.

S E T U P S E N D 6 - 5