Programming a Fax Forwarding Number
When Fax Forwarding is set to ON, your MFC stores the received fax in memory, then dials the fax number you’ve programmed, and forwards the fax message.
1 Press Function , 1 , 7 , 1 .
2Press 
or 
until the screen displays FAX FORWARD? and press Set .
3Enter the forwarding number (up to 20 digits) and press Set .
FAX FORWARD? SELECT <- -> & SET
FWD#:
ENTER & SET
4Press Stop to exit.
Setting Fax Storage
If you set Fax Storage to ON, you will be able to retrieve fax messages from another location, using Fax Forwarding, Paging, or Remote Retrieval functions. The screen will indicate when you have a fax stored in memory. The memory can store up to 700 pages of faxes.
1 Press Function , 1 , 7 , 2 .
2Press 
or 
to select ON (or OFF) and press Set .
3Press Stop to exit.
If there are faxes in memory when you turn Fax Storage OFF, you must choose to delete them or exit without turning Fax Storage on.
4Press 1 , to erase faxes from memory
and to turn Fax Storage off
— OR—
Press 2 , to exit without deleting faxes or changing this setting.
(See Printing a Fax in Memory, page
FAX STORAGE:OFF? SELECT <- -> & SET
ERASE ALL FAX? 1.YES 2.NO
8 - 2 | R E M O T E F A X O P T I O N S |
