Receiving Faxes into the PC

To receive faxes into your PC through the MFC, first you must have connected your MFC to your computer. Then, you can load the Multi-Function Link® Pro software. (See Setting up the MFC and PC to Work Together, page 12-1.)

Use the following checklists for the MFC and PC, to make sure you have properly set up the MFC and PC to work together.

Checklist for the MFC

1To make sure the MF Link mode is active, press Function , 1 , 2 , 0 .

2Use or to select ON (not OFF).

3Press Set .

Set MF Link mode to OFF only if you want all incoming faxes to be printed at the MFC.

Checklist for Your PC

1Make sure the MFC is connected to the PC.

2In the Main Menu, select the Setup pull-down menu.

3Select Preferences...

4Under Answer Mode, select Fax only.

5Click the OK button.

6Keep the PC and the Multi-Function Link® Pro Main Menu running at all times.

U S I N G M U L T I - F U N C T I O N L I N K ® P R O S O F T W A R E

16 - 5

Page 147
Image 147
Brother MFC 9600 owner manual Receiving Faxes into the PC, Checklist for the MFC, Checklist for Your PC