Brother MFC 9600 owner manual Canceling a Scheduled Job, Remaining Jobs

■ In FAX mode, the MFC will answer all numbers on the phone line.

■

■

■ To have your external TAD answer only the main number, the MFC must be in MANUAL Mode.

Telephone Services

Distinctive Ring

This feature lets you use the Distinctive Ring subscriber service offered by some telephone companies, which allows you to have several telephone numbers on one phone line. Each phone number has its own Distinctive Ring pattern, so you’ll know which phone number is ringing. This is one way you can have a separate phone number for your MFC.

Your MFC has a Distinctive Ring function, allowing you to dedicate one phone number just for receiving faxes. You’ll need to follow the directions below to “register” the new Distinctive Ring pattern, that was assigned by the Telephone Company, so your MFC can recognize its incoming calls.

You can change or cancel the Distinctive Ring pattern at any time. You can

switch it off temporarily, then turn it back on. When you get a new fax number, be sure you reset this function.

You can register only one Distinctive Ring pattern with the MFC. Some ring patterns cannot be registered.

You will not hear the first two rings of all incoming calls on the MFC.

The MFC will answer only calls to its registered number.

Canceling a Scheduled Job

You can cancel tasks you’ve scheduled, such as Delayed Fax or Polling Transmit. (See Checking Job Status, page 6-6.)

1Press Function , 1 , 4 .

Jobs waiting to be sent from memory appear on the display. If there are no jobs, the screen displays NO JOB WAITING.

4.REMAINING JOBS￿

￿

2If you have more than two jobs waiting, press or to select the job you want to cancel and press Set .

3 Press		1	to cancel— OR—Press 2 to exit without canceling.
	To cancel another job, return to Step 2.
4 Press		Stop	to exit.

S E T U P R E C E I V E 5 - 7