13 - 2
FOR DOS USERS
Printer Status Monitor Program
This utility program can monitor your printer’s status using bi-directional
parallel communications. This utility program stays resident in your
computer memory (Terminate-and-Stay Resident program) and runs in the
background.
Installing the Remote Printer ConsoleBefore you install the program, make sure you have the following
hardware and software to install the program:
DOS Version 3.3 or later
Monitor EGA/VGA or compatible
Option Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
Follow these steps to install the remote printer console program:
1
Make sure your Brother machine is connected to your computer and it is
set to Online.
2
Start your computer and go to the DOS prompt. If you are in Windows®,
exit and return to the DOS prompt.
3
Insert the Brother CD-ROM into your CD-ROM drive.
4
At the DOS prompt (C:\>) type x: (Substitute the drive letter of your CD-
ROM drive for “x”) and press Enter.
C:\>x:
5
Type CD DOS and press Enter.
x:\>CD DOS
6
Type RPCSETUP and press Enter.
x:\DOS>RPCSETUP
7
Follow the instructions from the installer.