Technika STBHDV2010 First Time Installation, Changing Channels, Adjusting the Volume, Mute

First Time Installation

IMPORTANT: Ensure that the aerial is connected before switching on the set top box for the rst installation.

•When the set-top-box is operated for the rst time, installation wizard will guide you through the process. First, TV Type selection on-screen menu will be displayed:

•Select the TV Type by using “”/“” buttons and press OK button to continue.

•Afterwards, HDMI resoulution selection menu OSD will be displayed:

•If your display is connected via HDMI connector, you can use BLUE button to dene HDMI resolution automatically.

•You can select the desired resolution by pressing “

”/“” button.

•Press GREEN button to apply changes and use OK button to continue.

•If you do not set a resolution, the following message will be displayed:

•Select Yes or No by using “”/“” button and press OK to continue and the following message will be displayed on the screen:

•To start installation process, select Yes by using “”/“” buttons and then press the OK button.

•The box will start to search available stations. The progress bar will move along the line. You should allow the set-top-box to complete the search to store all available stations.

Note: You can press MENU button to cancel.

Changing Channels

•You can change channels with the following methods.

•You can press the numeric buttons (0–9) to directly enter the channel number. You can press numeric buttons consecutively to enter two or more digits.

•Press the PR +/ PR - buttons to move up or down to the next available channel.

Note: You can press OK button to display the channel list.

Adjusting the Volume

Mute

•You can press to mute the sound of your set- top-box. The sound will be muted once this button is pressed.

•To cancel mute, you can press button again or use the V +/- buttons.

English - 8 -